my system is QNAP TS-409, which is armed platform
I have 3 disks and 2 partitions on each
When I start Debian Lenny installer based on instruction from
http://www.cyrius.com/debian/orion/qnap/ts-409/install.html my disks are
assigned to /dev/sd{a,b,c}.
I choose /dev/sda1 as /boot partition and /dev/sdb1 as swap.
On end of installation somepart of system are flashed to memory.
When I boot after successful installation it will not boot.
Unfortunately I don't see the UBoot output, but when I try boot with
rescue image or start installation again I see the the /dev/sda1 is swap
and not /boot, so the order of disks changed.
Is this change of disk order the problem why system is not booting ? Is
this normal behaviour ?
Sincerely,
Martin
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
Archive: http://lists.debian.org/[email protected]
