Your message dated Wed, 08 Sep 2010 03:57:55 +0000
with message-id <[email protected]>
and subject line Closing old installation report #299736
has caused the Debian Bug report #299736,
regarding installation-reports
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
299736: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=299736
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: installation-reports
Version: 20050314
Debian-installer-version:
Daily build of the i386 netboot, 20050314
uname -a:
Linux Amnesiac 2.6.10-1-k7-smp #1 SMP Fri Mar 11 04:38:08 EST 2005 i686 GNU/Linux
This is the 'uname -a' from the running system, not the attempt to
install.
Date:
03/15/05, about 1am
Method:
Booted PXE images, using isc-dhcpd and tftpd-hpa on the host, 3c920 on the target.
Netinstall from ftp.us.debian.org
Machine:
Tyan S2466 (AMD 762 chipset)
Processor:
2x Athlon 1.66
Memory:
512M
Root Device:
LVM2 on top of software RAID-5
Root Size/partition table:
cat /proc/mdstat:
md1 : active raid5 hdg1[0] hdb1[2] hde1[1]
240121472 blocks level 5, 64k chunk, algorithm 2 [3/3] [UUU]
md0 : active raid5 hda[0] hdh[3] hdf[2] hdd[1]
468872448 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU]
pvdisplay:
--- Physical volume ---
PV Name /dev/md0
VG Name vg0
PV Size 447.09 GB / not usable 0
Allocatable yes (but full)
PE Size (KByte) 4096
Total PE 114455
Free PE 0
Allocated PE 114455
PV UUID e4dqhc-3LpQ-NdIS-cX6A-QQkh-QP6u-EW40AX
--- Physical volume ---
PV Name /dev/md1
VG Name vg0
PV Size 229.00 GB / not usable 0
Allocatable yes (but full)
PE Size (KByte) 4096
Total PE 58623
Free PE 0
Allocated PE 58623
PV UUID jR3omr-Pljr-Y15q-sLzm-pdGq-v3bo-0ZEImB
lvdisplay:
--- Logical volume ---
LV Name /dev/vg0/lvol0
VG Name vg0
LV UUID I1RzXY-FGta-YmW2-g6v8-85Qr-EwDX-VuOSZF
LV Write Access read/write
LV Status available
# open 0
LV Size 16.00 GB
Current LE 4096
Segments 1
Allocation inherit
Read ahead sectors 0
Block device 254:0
--- Logical volume ---
LV Name /dev/vg0/lvol1
VG Name vg0
LV UUID DiHCbE-0qWo-wR79-Elzc-q3VE-QH6W-g4cOvS
LV Write Access read/write
LV Status available
# open 1
LV Size 660.09 GB
Current LE 168982
Segments 2
Allocation inherit
Read ahead sectors 0
Block device 254:1
vg0-lvol0 was intended to be the root filesystem.
Output of lspci and lspci -n:
lspci:
0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP
[IGD4-2P] System Controller (rev 11)
0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP
[IGD4-2P] AGP Bridge
0000:00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus]
ISA (rev 04)
0000:00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus]
IDE (rev 04)
0000:00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI
(rev 03)
0000:00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus]
PCI (rev 04)
0000:01:05.0 VGA compatible controller: nVidia Corporation NV20
[GeForce3] (rev a3)
0000:02:04.0 Unknown mass storage controller: Promise Technology, Inc.
PDC20268 (Ultra100 TX2) (rev 02)
0000:02:06.0 USB Controller: OPTi Inc. 82C861 (rev 20)
0000:02:06.1 USB Controller: OPTi Inc. 82C861 (rev 20)
0000:02:07.0 Multimedia audio controller: Creative Labs SB Live!
EMU10k1 (rev 0a)
0000:02:07.1 Input device controller: Creative Labs SB Live! MIDI/Game
Port (rev 0a)
0000:02:08.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M
[Tornado] (rev 78)
lspci -n:
0000:00:00.0 0600: 1022:700c (rev 11)
0000:00:01.0 0604: 1022:700d
0000:00:07.0 0601: 1022:7440 (rev 04)
0000:00:07.1 0101: 1022:7441 (rev 04)
0000:00:07.3 0680: 1022:7443 (rev 03)
0000:00:10.0 0604: 1022:7448 (rev 04)
0000:01:05.0 0300: 10de:0200 (rev a3)
0000:02:04.0 0180: 105a:4d68 (rev 02)
0000:02:06.0 0c03: 1045:c861 (rev 20)
0000:02:06.1 0c03: 1045:c861 (rev 20)
0000:02:07.0 0401: 1102:0002 (rev 0a)
0000:02:07.1 0980: 1102:7002 (rev 0a)
0000:02:08.0 0200: 10b7:9200 (rev 78)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Create file systems: [E]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
The install went smoothly until I attempted to use the partitioner. My Promise
IDE controller that uses the pdc202x_new driver was detected automatically and
correctly, much to my surprise.
The disk partitioner failed to detect arrays created by mdadm before the installation. In the emergency shell, I was
unable to persuade mdadm to assemble my arrays. I believe that to have been user error. Inexplicably, the LVM menu
detected and "activated" my LVM2 volume group, although its volumes were not usable. vg0-lvol0, it detected
the size correctly and showed pre-existing XFS filesystem. vg0-lvol1 was displayed on the parted menu, but there were
no partition entries under the device. vg0-lvol1's size was listed as "0B0," that is, zero-bee-zero.
Lastly, while the partition editor was "detecting filesystems," it gave me the error "could not create
disklabel" when no changes were supposed to be written to disk.
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---
