Your message dated Wed, 08 Sep 2010 03:58:42 +0000
with message-id <[email protected]>
and subject line Closing old installation report #262070
has caused the Debian Bug report #262070,
regarding failed installation report
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
262070: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=262070
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: installation-reports
Debian-installer-version:
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/20040727/sarge-i386-netinst.iso
uname -a: Linux lovesong 2.4.26-1-386 #2 Sat May 1 16:31:24 EST 2004 i686
GNU/Linux
Date: 2004 07 28 at about 3P.M. EDT
Method:
Used SBM to boot from the CD I burned from the above-mentioned .iso image.
Never got as far as reaching the network.
Machine: ASUS motherboard
Processor:, Athlon processor, 1600 MHz.
Memory: 1 gigabyte
Root Device: an IDE DVD drive, reading from a CD-ROM.
Root Size/partition table:
Root partition is /dev/hda3, 8.5 Gigabytes. The entire sarge system
is being installed within this partition, including
/home, /boot, and everything. It is formatted during installation
with the reiser file system.
/dev/hda4 contains a working woody system. It works perfectly
before and after the sarge installation.
/dev/hda1 contains a working Windows ME system. It works just as
badly before and after installation.,
Output of lspci:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333
AGP]
0000:00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 46)
0000:00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:00:0f.0 RAID bus controller: Promise Technology, Inc. PDC20265
(FastTrak100 Lite/Ultra100) (rev 02)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc R200 BB [Radeon
All in Wonder 8500DV]
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [E]
Config network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
My experiences are quite similar to those I had with the Beta-4
installer I tried yesterday and reported on in bug#261745.
Everything went smoothly, except:
After the reboot I about 16 complaints of the form:
NETDEV WATCHDOG: eth0: transmit timed out
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
When I specified the Debian mirror I wanted to use, and it tried to
reach the site, I again got these messages, after which it informed
me that the mirror was unreachable. Methinks it is /dev/eth0 that is
unreachable. The messages continued sporadically until I rebooted out
of the installation.
Please let me know what additional actins you would like me to take
to diagnose this problem. I suspect it may not be a problem with the
installer per se, but perhaps with some of the software being installed.
My woody system, on the same machine in partition /dev/hda4, works
perfectly.
For completeness, here is the routing table (obtained by route -n):
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
172.25.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 172.25.1.1 0.0.0.0 UG 0 0 0 eth0
and here's the output from ifconfig:
eth0 Link encap:Ethernet HWaddr 00:0A:E6:55:93:CD
inet addr:172.25.1.4 Bcast:172.25.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:18 Base address:0xb400
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:96 errors:0 dropped:0 overruns:0 frame:0
TX packets:96 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:8688 (8.4 KiB) TX bytes:8688 (8.4 KiB)
I have a woody system on partition /dev/hda4, and it gives me the same
route -n and ifconfig output.
lsmod suggests to me that indicates that 8139too does indeed appear to
be loaded. I believe it is the proper driver for my ethernet card.
Module Size Used by Not tainted
nls_cp437 4284 2 (autoclean)
floppy 44348 2 (autoclean)
vfat 8908 1 (autoclean)
fat 28152 0 (autoclean) [vfat]
scanner 10592 0 (unused)
radeonfb 20972 63
fbcon-cfb8 3176 0 [radeonfb]
fbcon-cfb32 3656 0 [radeonfb]
fbcon-cfb16 3752 0 [radeonfb]
fbcon-cfb24 4040 0 [radeonfb]
ehci-hcd 14892 0 (unused)
usb-uhci 19632 0 (unused)
usbcore 52908 1 [scanner ehci-hcd usb-uhci]
via82cxxx_audio 17692 0 (unused)
ac97_codec 11412 0 [via82cxxx_audio]
uart401 6244 0 [via82cxxx_audio]
sound 50280 0 [via82cxxx_audio uart401]
soundcore 3268 4 [via82cxxx_audio sound]
ide-scsi 8464 0
8139too 12744 1
mii 1952 0 [8139too]
crc32 2848 0 [8139too]
ohci1394 21776 0 (unused)
sr_mod 12248 0 (unused)
sbp2 15412 0 (unused)
ieee1394 179268 0 [ohci1394 sbp2]
scsi_mod 85380 2 [ide-scsi sr_mod sbp2]
ide-cd 27936 0
cdrom 25056 0 [sr_mod ide-cd]
rtc 6280 0 (autoclean)
reiserfs 154928 1 (autoclean)
ide-detect 288 0 (autoclean) (unused)
via82cxxx 9416 1 (autoclean)
ide-disk 12512 2 (autoclean)
pdc202xx_old 9892 1 (autoclean)
ide-core 93948 2 (autoclean) [ide-scsi ide-cd ide-detect
via82cxxx ide-disk pdc202xx_old]
unix 13260 2 (autoclean)
Here's the contents of /proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Athlon(tm) XP 2000+
stepping : 0
cpu MHz : 1661.976
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3316.12
And here's /proc/pci:
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] (rev 0).
Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] (rev
0).
Master Capable. No bursts. Min Gnt=12.
Bus 0, device 13, function 0:
FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev
70).
IRQ 17.
Master Capable. Latency=32. Max Lat=32.
Non-prefetchable 32 bit memory at 0xe0130000 [0xe01307ff].
I/O at 0xb000 [0xb07f].
Bus 0, device 14, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
(rev 16).
IRQ 18.
Master Capable. Latency=32. Min Gnt=32.Max Lat=64.
I/O at 0xb400 [0xb4ff].
Non-prefetchable 32 bit memory at 0xe0131000 [0xe01310ff].
Bus 0, device 15, function 0:
RAID bus controller: Promise Technology, Inc. 20265 (rev 2).
IRQ 19.
Master Capable. Latency=32.
I/O at 0xb800 [0xb807].
I/O at 0xbc00 [0xbc03].
I/O at 0xc000 [0xc007].
I/O at 0xc400 [0xc403].
I/O at 0xc800 [0xc83f].
Non-prefetchable 32 bit memory at 0xe0100000 [0xe011ffff].
Bus 0, device 16, function 0:
USB Controller: VIA Technologies, Inc. USB (rev 128).
IRQ 21.
Master Capable. Latency=32.
I/O at 0xcc00 [0xcc1f].
Bus 0, device 16, function 1:
USB Controller: VIA Technologies, Inc. USB (#2) (rev 128).
IRQ 21.
Master Capable. Latency=32.
I/O at 0xd000 [0xd01f].
Bus 0, device 16, function 2:
USB Controller: VIA Technologies, Inc. USB (#3) (rev 128).
IRQ 21.
Master Capable. Latency=32.
I/O at 0xd400 [0xd41f].
Bus 0, device 16, function 3:
USB Controller: VIA Technologies, Inc. USB 2.0 (rev 130).
IRQ 19.
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xe0132000 [0xe01320ff].
Bus 0, device 17, function 0:
ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge (rev 0).
Bus 0, device 17, function 1:
IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C
PIPC Bus Master IDE (rev 6).
IRQ 11.
Master Capable. Latency=32.
I/O at 0xd800 [0xd80f].
Bus 0, device 17, function 5:
Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97
Audio Controller (rev 80).
IRQ 22.
I/O at 0xdc00 [0xdcff].
Bus 1, device 0, function 0:
VGA compatible controller: ATI Technologies Inc Radeon R200 BB [Radeon All
in Wonder 8500DV] (rev 0).
IRQ 16.
Master Capable. Latency=32. Min Gnt=8.
Prefetchable 32 bit memory at 0xd8000000 [0xdfffffff].
I/O at 0xa000 [0xa0ff].
Non-prefetchable 32 bit memory at 0xe0000000 [0xe001ffff].
Non-prefetchable 32 bit memory at 0xe0040000 [0xe004ffff].
-- [email protected]
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---
