Your message dated Wed, 08 Sep 2010 03:58:26 +0000
with message-id <[email protected]>
and subject line Closing old installation report #426607
has caused the Debian Bug report #426607,
regarding Installer problem Toshiba Qosmio G25 Laptop
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
426607: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=426607
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: installation-report / bug report
Boot method: <How did you boot the installer? CD? floppy? network?>
I used a "Netinstall" cd.
Image version: <Full URL to image you downloaded is best>
http://cdimage.debian.org/cdimage Downloaded on 4/29/07 i386 version
Date: <Date and time of the install>
Started working on the install about 5/25/07
Machine: <Description of machine (eg, IBM Thinkpad R32)>
Toshiba Qosmio G25 laptop
Nvidea GeForce Go6600 video card
SoundMax integrated Digital Audio
Intel PRO/wireless 2915ABG
Toshiba software modem
Matshita IDE DVD R/W player UJ-845S Firmware=D100
Toshiba RAID 60 GB drives LD0 and LD1
Processor:
Intel Pentium M 2GHz
Memory:
1 GB
Partitions: <df -Tl will do; the raw partition table is preferred>
BusyBox doesn't support -Tl switches. Used df -m:
Filesystem 1M-blocks used available Use%
Mounted on
udev 10 0 10 0%
/dev
Note: Dual boot system Drive 1 (60 GB) widows XP Pro SP2. Drive 2 (60 GB)
s/b linux
Output of lspci -nn and lspci -vnn:
BusyBox doesn't support lspci
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O ]
Detect network card: [O ]
Configure network: [O ]
Detect CD: [O ]
Load installer modules: [O ]
Detect hard drives: [O ]
Partition hard drives: [O ]
Install base system: [O ]
Clock/timezone setup: [O ]
User/password setup: [O ]
Install tasks: [E ]
Install boot loader: [O ]
Overall install: [E ]
Comments/Problems:
On the first pass, the "Install tasks" seemed to work OK but exited with
an error. I re-ran the "Install tasks" . It downloaded another 70 files,
installed them and exited OK. Possibly dependency problems? Not serious.
The overall install seemed to work OK but on reboot hung up at the
following point:
Begin: Waiting for root file system (Hung for about 5 minutes)
Done.
ALERT! /dev/sdb1 does not exist. Dropping to a shell!
Check your root= boot argument (cat /proc/cmdline) [Which gave:
root = /dev/sdb1 ro]
Check for missing modules (cat /proc/modules, or device files
(ls /dev)
_________________
[(cat /proc/modules) gives:
ide_generic 1408 0 [permanent], Live 0xf887e000
ide_cd 36034 0 - Live0xf891a000
cdrom 32544 1 ide_cd, Live 0xf8925000
ahci 17636 0 - Live 0xf88fr000
generic 5476 0 [permanent], Live x0f881a000
ohci1394 30800 0- Live 0xf88eb00
ieee1394 86904 1 ohci1394, Live 0xf88fb000
e100 32232 0 - Live 0xf88d7000
mii 5344 1 e100, Live 0xf8880000
ehci_hcd 28136 0 - Live 0xf8889000
ata_piix 13576 0 - Live 0xf8820000
libata 89396 2 ahci, libata, Live 0xf88c0000
scsi_mod 124168 2 ahci, libata, Live x0f88a0000
piix 9444 0 [permanent], Live 0xf8825000
ide_core 110504 4 ide_generic, ide_cd, generic, piix,
Live 0xf883f000
uhci_hcd 21164 0 - Live 0xf8838000
usbcore 112644 3 ehci_hcd, uhci_hcd, Live 0xf885b000
thermal 13608 0 - Live 0xf8833000
processor 28840 1 thermal, Live 0xf882a000
fan 4804 0 - Live 0xf881d000
(ls /dev) gives:
bus, cdrw,console, disk, dvd,dvdrw, full. hda, hpet,
input,kmem. kmsg,
mem, nul, port, psaux, ptmx, ptyp ... ,tty ..., urandom, usbdevx.x_epxx
...,
vcs ..., zero]
_______________________
BusyBox v1.1.3 (Debian 1:1.1.3-4) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs)
I have never gotten beyond this point. /root doesn't seem to exist.
__________________
Note: A warning note in the instructions for us idiots that haven't
burned an .iso disk for a long time might help. I recreated the .iso the
first try.
A warning that there is not support for the wireless LAN system (Intel
PRO/wireless 2915ABG) and/or that a hardwire LAN hookup is advised.
___________________
Grub works OK, WinXP works OK
Pretty slick until the end. Help!!!
Gary Roach
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---
