Your message dated Sat, 22 Jan 2011 18:20:50 +0000
with message-id <[email protected]>
and subject line
has caused the Debian Bug report #307232,
regarding can't boot rc3 netboot+cd on oldworld, floppy undocumented (Re:
Can't boot floppy on PowerMac G3)
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
307232: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=307232
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
package: debian-installer-manual
mainly a repost to the BTS, one more info: cd booting on oldworld was possible
with woody, according to http://www.biccard.com/alan/7200/7200boot.html
Hi,
On Sunday 24 April 2005 19:53, Jon Niehof wrote:
> I see on the status page that CD booting should work on old
> world now--is there any documentation on that? Despite the media
> bay ATAPI interface being listed in the device aliases, I can't
> get a directory listing on it in OFW and "boot cdrom:" just
> boots macos off the hard drive. I presume the yaboot
> instructions in the installer manual aren't applicable.
According to the (netbsd)-docs I found, it's "bood cd:" or
"boot scsi/sd@3:0/install/powerpc/vmlinuz-coff.initrd" for my 7200 where the
scsi-cd has id 3.
0 > boot scsi/sd@3:0
RESETing to change Configuration!
no bootable HFS partition
Open Firmware, 1.0.5
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
ok
0 > boot scsi/sd@3:,/install/powerpc/vmlinuz-coff.initrd bad partition number,
using 0 can't OPEN: scsi/sd@3:,/install/powerpc/vmlinuz-coff.initrd
ok
0 > boot scsi/sd@3:/install can't OPEN: scsi/sd@3:/install
ok
0 > boot scsi/sd@3:/install/powerpc/vmlinuz-coff.initrd can't OPEN:
scsi/sd@3:/install/powerpc/vmlinuz-coff.initrd
ok
0 > boot scsi/sd@3:0,/install/powerpc/vmlinuz-coff.initrd bad partition
number, using 0 can't OPEN: scsi/sd@3:0,/install/powerpc/vmlinuz-coff.initrd
ok
0 >
Netbooting d-i doesnt work as well. At least for the OF 1.0.5 of my 7200 the
5.2mb initrd is too big, it works with a smaller (1.2 mb) kernels. According
to ethereal it hangs after 8169 packets, each 588 bytes in size. This is
roughly 4mb.
Firmware, 1.0.5
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
ok
0 > ok
0 > boot enet: file: 192.168.45.23,/tftpboot/vmlinuz-coff.initrd/DEFAULT
CATCH!, code=FFF00400
ok
0 >
# note: i only needed to enter "boot enet:" to successfully boot smaller
# kernels.
the relevant snippet from my dhcpd.conf
host pmac7200 {
hardware ethernet 00:00:00:00:00:00;
next-server 192.168.45.23;
filename "/tftpboot/vmlinuz-coff.initrd";
}
btw, I've just tested the 2-4 boot.img, both the daily and the rc3 image, both
work. (Although I find it odd, that images from 03-23, the rc3 release day,
doesnt exit...neither a link) They were fetched from
http://people.debian.org/luther/d-i/images/daily/powerpc/floppy-2.4/boot.img
and ~luther/d-i/sarge/images/2005-03-24/powerpc/floppy-2.4/boot.img
and written with
dd if=/tmp/boot.img of=/dev/fd0 bs=1k conv=sync ; sync ;
cmp /dev/fd0 /tmp/boot.img
summary:
- i'm still not sure about the cd issues - there are many OF versions with
different bugs and features or vice versa ;) - but see below..
- document how to netboot on oldworld, maybe works on some models
- document the models where netbooting d-i doesnt work
- creater smaller (only-english) initrds to allow netbooting (as floppy
bootint has legal problems)
http://d-i.alioth.debian.org/manual/en.powerpc/ch05s01.html#boot-cd
if this is correct, booting from cd via OF is not possible.
but if
ftp://ftp.NetBSD.org/pub/NetBSD/NetBSD-2.0/macppc/INSTALL.html#Booting%20the%20NetBSD%2Fmacppc%20install%20CD-R
is correct, it's possible. (With all versions of OF: quote: "(Open Firmware
1.0.5, Open Firmware 1.1.22, Open Firmware 2.0.x, Open Firmware 2.4)"
ftp://ftp.NetBSD.org/pub/NetBSD/NetBSD-2.0/macppc/INSTALL.html#Supported%20models
has a overview, which model has which version of OF. (btw, the 7200 is not
support by netbsd because of the cpu...)
http://d-i.alioth.debian.org/manual/en.powerpc/ch05s01.html#boot-tftp
misses oldworld and chrp pegasos2. (It's possible on both archs, but the
current d-i initrd is too big for oldworld.)
http://d-i.alioth.debian.org/manual/en.powerpc/ch05s01.html#id2532179
definitly needs an update and a nicer URL ;-)
So I guess I will make five (? ;) bugs out of this mail to track the issues.
regards,
Holger
pgpdOv5WDnVYk.pgp
Description: PGP signature
--- End Message ---
--- Begin Message ---
Floppies are no longer supported in the installer.
Hence, i am closing this BR.
--
Melhores cumprimentos/Best regards,
Miguel Figueiredo
http://www.DebianPT.org
--- End Message ---
