Package: installation-reports
Boot method: CD and USB key
Image version:
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/
debian-testing-i386-netinst.iso 23 and 24-Jan-2012
Date: 23 and 24-Jan-2012
Machine: Dell Optiplex 260 and Dell Latitude D410
Processor: Petium 4 CPU 2GHz
Memory: 1Go
Partitions: NO SIGNIFICANT
/dev/sda3 62G 9,4G 49G 16% /
/dev/sdb1 184G 188M 174G 1% /data
Output of lspci -knn (or lspci -nn):
00:00.0 Host bridge [0600]: Intel Corporation
82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface
[8086:2560] (rev 01)
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation
82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge [8086:2561] (rev 01)
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01)
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01)
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01)
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM
(ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01)
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev 81)
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L)
LPC Interface Bridge [8086:24c0] (rev 01)
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE
Controller [8086:24cb] (rev 01)
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01)
Kernel modules: i2c-i801
00:1f.5 Multimedia audio controller [0401]: Intel Corporation
82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5]
(rev 01)
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV17
[GeForce4 MX 420] [10de:0172] (rev a3)
Kernel driver in use: nouveau
Kernel modules: nvidiafb, rivafb, nouveau
02:0c.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit
Ethernet Controller [8086:100e] (rev 02)
Kernel driver in use: e1000
Kernel modules: e1000
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [E]
Configure network: [E]
Detect CD: [O]
Load installer modules: [E] it stop here.
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
* First warning message just after the language choice :
"No kernel modules were found. This probably is due to a mismatch
between the kernel used by this version of installer and the kernel
version availablein the archive. [...] COntinue the install without
loadig kernel modules?"
If I choose to continue the ethernet card is not recognize :
"No ethernet card was detected.[...]"
"Driver needed by your Ethernet card :
No ethernet card
hdlc
none of above"
Fisrt two choices loop back
Third choice :
"A driver for your hardware is not available. [...] Load missing drivers
from removable media ?"
If I choose Yes, the USB key not recognized.
Here the installation stops.
Thanks !
Bertrand
