Package: debian-installer
Version: testing
Severity: important
Dear Maintainer,
* What led up to the situation?
I tried installing Debian using the partition layout provided in the
gentoo wiki:
http://en.gentoo-wiki.com/wiki/Root_filesystem_over_LVM2,_DM-Crypt_and_RAID
* What exactly did you do (or not do) that was effective (or
ineffective)?
I went through the steps of debian-installer, configured the partitions
like described above.
This is the output of gdisk (its for /dev/sda , but /dev/sdb is the
same)
GPT fdisk (gdisk) version 0.8.2
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Disk /dev/sda: 1953525168 sectors, 931.5 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 853F5A88-B593-4BFC-88BC-DC825FB9BD90
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1953525134
Partitions will be aligned on 2048-sector boundaries
Total free space is 2014 sectors (1007.0 KiB)
Number Start (sector) End (sector) Size Code Name
1 2048 4095 1024.0 KiB EF02
2 4096 585727 284.0 MiB FD00
3 585728 1953525134 931.2 GiB FD00
* What was the outcome of this action?
Grub install failed with an fatal error ( http://pastebin.com/2akhkUCR )
I tried around a little bit and discovered that the boot partition
wasn't mounted at /target/boot while all other partitions were mounted at there
respective place in /target.
Instead there was just a folder /target/grub with all the files that
should have been gone to the boot partition.
After moving that folder to /target/bootbak, creating /target/boot,
mounting /dev/md0 (the boot partition) there, copying all files from bootbak to
boot (which is probably unnecessary) debian-installers "Install Grub
bootloader" worked :)
So probably debian-installer missed mounting /dev/md0 to /target/boot
so grub install failed.
* What outcome did you expect instead?
Grub should have been installed without problems / the boot partition
should have been mounted at /target/boot automatically
This problem occured as well with debian stable (but in a vm) and I didn't
check whether the missing boot partition was the root of the problem there as
well.
In my "real-world" installation the error occured both, with the above
described partition setup and one with msdos partitiontable. But same goes
here, I didn't check whether the missing boot partitin caused the problem there
as well.
Furthermore /dev/md0 /boot was missing in /fstab. Instead the usb stick I
installed from was in there to mount to /mnt/usb1 (or another number, can't
remember).
-- System Information:
Debian Release: wheezy/sid (<-- I'm using testing, dont know what the sid does
there, reportbug created this section..)
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
Archive:
http://lists.debian.org/[email protected]
