Package: installation-reports Severity: minor -- Package-specific info:
Boot method: usb stick Image version: http://cdimage.debian.org/cdimage/wheezy_di_beta2/i386/iso-cd/debian-wheezy-DI-b2-i386-netinst.iso 2012-09-06 Date: <Date and time of the install> 2012-09-19 Machine: ASUS Eee box B202 Partitions: <df -Tl will do; the raw partition table is preferred> I will give both: Filesystem Type 1K-blocks Used Available Use% Mounted on rootfs rootfs 20442028 3431792 15984856 18% / udev devtmpfs 10240 0 10240 0% /dev tmpfs tmpfs 206436 540 205896 1% /run /dev/disk/by-uuid/e02c0c78-a3fb-4d63-ba55-253382e24e59 ext4 20442028 3431792 15984856 18% / tmpfs tmpfs 5120 0 5120 0% /run/lock tmpfs tmpfs 1199280 0 1199280 0% /run/shm /dev/sda2 ext3 24029456 1246040 21562716 6% /home /dev/sda1 ext3 28835836 1484980 25886076 6% /squeeze_root Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xcb5bd2b2 Device Boot Start End Blocks Id System /dev/sda1 2048 58593279 29295616 83 Linux /dev/sda2 58593280 107421404 24414062+ 83 Linux /dev/sda3 148436992 156301311 3932160 82 Linux swap / Solaris /dev/sda4 * 107421696 148436991 20507648 83 Linux Partition table entries are not in disk order Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Clock/timezone setup: [O] User/password setup: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] Comments/Problems: <Description of the install, in prose, and any thoughts, comments and ideas you had during the initial install.> Description of the install: I used the expert text install. This was an install where I attempted to minimize what was installed by navigating (when the time came) into the install tasks menu but excluding everything on tasksel's checklist menu. Once this "minimum package" install was done, and the reboot was succesful, then I continued on the normal command line with apt-get install of X, KDE, etc., configuring as I went. That process of adding packages is almost done now, and the system information collected below presumably reflects that since I delayed sending in a report until this command-line installation part of the install (which has nothing to do with the installer) was almost done. The initial minimum wheezy install did require resizing an existing partition (mounted as /home for the previous Debian squeeze install) without losing information. That was the first time I had ever tried resizing with the aid of the Debian installer, and it was a success. The result was I was able to preserve my previous squeeze install and dual-boot from it. This dual-boot to squeeze could be useful in an emergency, although so far I have only tested that dual-boot works, and I haven't actually needed it for such an emergency. Any thoughts, comments and ideas you had during the initial install: My thoughts were the text install would have been quite simple for even Debian newbies (which I am not) except for the misleading/noninformative navigation messages mentioned in the above subject line: Here are my notes (taken at the time) on those misleading/noninformative navigation messages: Start screen says "Press ENTER to boot or TAB to edit a menu entry" That last verb is nonsensical. Why would you want to "edit" a menu entry? I think what is meant here is navigate (as opposed to edit) menus. However, I am not sure because the tab key did nothing! I actually navigated to the advance options using the arrow key (not the tab key) and then entered that menu with ENTER (contrary to the above message which claims that will boot). I then chose Expert install in that advanced menu, and for this case RETURN does boot. But then in text mode there continues to be misleading messages about navigation. For example, in the first overall choice menu, it claims <TAB> moves <SPACE> selects, <ENTER> activates buttons, but in fact for this screen <TAB> and <SPACE> do nothing, arrow keys actually move from one menu item to the next, and <ENTER> selects the item! Later I did discover screens where <TAB> did actually make overall moves (although the arrows and not the <space> bar were still needed to navigate individual menus). Anyhow, some attention to the navigation messages displayed for each screen to make them appropriate for that screen would be a huge help to newbies in my opinion. Other misleading messages: * "Detect and mount CD-ROM" is misleading when installing from a USB stick (as I was). Even the actual successful detection message claimed my USB stick was a CD-ROM. This overall menu item should read instead something like "Detect and mount installation medium (CD-ROM, USB-stick, etc.) * Same issue with "Load installer components from CD" -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to [email protected]. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="7.0 (wheezy) - installer build 20120828" X_INSTALLATION_MEDIUM=cdrom ============================================== Installer hardware-summary: ============================================== uname -a: Linux meadowlark 3.2.0-3-486 #1 Mon Jul 23 02:47:49 UTC 2012 i686 GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GSE Express Memory Controller Hub [8086:27ac] (rev 03) lspci -knn: Subsystem: Intel Corporation Mobile 945GSE Express Memory Controller Hub [8086:27ac] lspci -knn: Kernel driver in use: agpgart-intel lspci -knn: 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller [8086:27ae] (rev 03) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1252] lspci -knn: 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1252] lspci -knn: 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:8331] lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1347] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1347] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1347] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1347] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1347] lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1347] lspci -knn: 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] [8086:27c4] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1347] lspci -knn: Kernel driver in use: ata_piix lspci -knn: 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1347] lspci -knn: 03:00.0 Network controller [0280]: Ralink corp. RT2790 Wireless 802.11n 1T/2R PCIe [1814:0781] lspci -knn: Subsystem: Ralink corp. Device [1814:2790] lspci -knn: Kernel driver in use: rt2800pci lspci -knn: 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:8168] lspci -knn: Kernel driver in use: r8169 usb-list: usb-list: Bus 01 Device 01: EHCI Host Controller [1d6b:0002] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 3.2.0-3-486 ehci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 01 Device 04: USB2.0-CRW [0bda:0158] usb-list: Level 01 Parent 01 Port 05 Class 00(>ifc ) Subclass 00 Protocol 00 usb-list: Manufacturer: Generic usb-list: Interface 00: Class 08(mstor) Subclass 06 Protocol 50 Driver <none> usb-list: usb-list: Bus 02 Device 01: UHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 3.2.0-3-486 uhci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 02 Device 02: PS2 to USB Converter [0a81:0205] usb-list: Level 01 Parent 01 Port 01 Class 00(>ifc ) Subclass 00 Protocol 00 usb-list: Manufacturer: CHESEN usb-list: Interface 00: Class 03(HID ) Subclass 01 Protocol 01 Driver usbhid usb-list: Interface 01: Class 03(HID ) Subclass 01 Protocol 02 Driver usbhid usb-list: usb-list: Bus 03 Device 01: UHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 3.2.0-3-486 uhci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 04 Device 01: UHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 3.2.0-3-486 uhci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 05 Device 01: UHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 3.2.0-3-486 uhci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub lsmod: Module Size Used by lsmod: ufs 57656 0 lsmod: qnx4 12992 0 lsmod: ntfs 161713 0 lsmod: reiserfs 167376 0 lsmod: efivars 17508 0 lsmod: dm_mod 57354 0 lsmod: md_mod 81567 0 lsmod: xfs 511016 0 lsmod: jfs 131002 0 lsmod: ext4 298051 1 lsmod: crc16 12327 1 ext4 lsmod: jbd2 51542 1 ext4 lsmod: ext3 133836 2 lsmod: jbd 42496 1 ext3 lsmod: btrfs 471514 0 lsmod: zlib_deflate 21318 1 btrfs lsmod: crc32c 12576 1 lsmod: libcrc32c 12394 1 btrfs lsmod: ext2 49804 0 lsmod: mbcache 12897 3 ext2,ext3,ext4 lsmod: rt2800pci 13615 0 lsmod: rt2800lib 43217 1 rt2800pci lsmod: rt2x00pci 12768 1 rt2800pci lsmod: rt2x00lib 29158 3 rt2x00pci,rt2800lib,rt2800pci lsmod: eeprom_93cx6 12423 1 rt2800pci lsmod: crc_ccitt 12331 1 rt2800lib lsmod: mac80211 167554 3 rt2x00lib,rt2x00pci,rt2800lib lsmod: cfg80211 117608 2 mac80211,rt2x00lib lsmod: rfkill 18715 1 cfg80211 lsmod: vfat 17117 0 lsmod: fat 40365 1 vfat lsmod: arc4 12418 2 lsmod: r8169 41965 0 lsmod: mii 12595 1 r8169 lsmod: nls_utf8 12416 0 lsmod: isofs 30544 0 lsmod: usbhid 31673 0 lsmod: hid 60120 1 usbhid lsmod: thermal 13103 0 lsmod: fan 12594 0 lsmod: thermal_sys 17752 2 fan,thermal lsmod: usb_storage 35245 0 lsmod: sg 21589 0 lsmod: sd_mod 35425 5 lsmod: crc_t10dif 12332 1 sd_mod lsmod: ata_generic 12439 0 lsmod: ata_piix 21296 4 lsmod: libata 121219 2 ata_piix,ata_generic lsmod: uhci_hcd 22506 0 lsmod: ehci_hcd 35684 0 lsmod: scsi_mod 135629 4 libata,sd_mod,sg,usb_storage lsmod: usbcore 100493 5 ehci_hcd,uhci_hcd,usb_storage,usbhid lsmod: usb_common 12338 1 usbcore df: Filesystem 1K-blocks Used Available Use% Mounted on df: none 206568 44 206524 0% /run df: tmpfs 1032832 0 1032832 0% /dev df: /dev/sda4 20442028 911148 18505500 5% /target df: /dev/sda2 24029456 1008132 21800624 4% /target/home df: /dev/sda1 28835836 1488480 25882576 5% /target/squeeze_root df: /dev/sda4 20442028 911148 18505500 5% /dev/.static/dev df: tmpfs 1032832 0 1032832 0% /target/dev free: total used free shared buffers free: Mem: 2065664 662236 1403428 0 65624 free: -/+ buffers: 596612 1469052 free: Swap: 3932156 0 3932156 /proc/cmdline: priority=low vga=788 initrd=/install.386/initrd.gz -- BOOT_IMAGE=/install.386/vmlinuz /proc/cpuinfo: processor : 0 /proc/cpuinfo: vendor_id : GenuineIntel /proc/cpuinfo: cpu family : 6 /proc/cpuinfo: model : 28 /proc/cpuinfo: model name : Intel(R) Atom(TM) CPU N270 @ 1.60GHz /proc/cpuinfo: stepping : 2 /proc/cpuinfo: microcode : 0x208 /proc/cpuinfo: cpu MHz : 1608.236 /proc/cpuinfo: cache size : 512 KB /proc/cpuinfo: fdiv_bug : no /proc/cpuinfo: hlt_bug : no /proc/cpuinfo: f00f_bug : no /proc/cpuinfo: coma_bug : no /proc/cpuinfo: fpu : yes /proc/cpuinfo: fpu_exception : yes /proc/cpuinfo: cpuid level : 10 /proc/cpuinfo: wp : yes /proc/cpuinfo: flags : fpu vme de tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 xtpr pdcm movbe lahf_lm dtherm /proc/cpuinfo: bogomips : 3216.47 /proc/cpuinfo: clflush size : 64 /proc/cpuinfo: cache_alignment : 64 /proc/cpuinfo: address sizes : 32 bits physical, 32 bits virtual /proc/cpuinfo: power management: /proc/cpuinfo: /proc/ioports: 0000-0cf7 : PCI Bus 0000:00 /proc/ioports: 0000-001f : dma1 /proc/ioports: 0020-0021 : pic1 /proc/ioports: 0040-0043 : timer0 /proc/ioports: 0050-0053 : timer1 /proc/ioports: 0060-0060 : keyboard /proc/ioports: 0064-0064 : keyboard /proc/ioports: 0070-0071 : rtc0 /proc/ioports: 0080-008f : dma page reg /proc/ioports: 00a0-00a1 : pic2 /proc/ioports: 00c0-00df : dma2 /proc/ioports: 00f0-00ff : fpu /proc/ioports: 0170-0177 : 0000:00:1f.2 /proc/ioports: 0170-0177 : ata_piix /proc/ioports: 01f0-01f7 : 0000:00:1f.2 /proc/ioports: 01f0-01f7 : ata_piix /proc/ioports: 025c-025f : pnp 00:07 /proc/ioports: 0290-0297 : pnp 00:06 /proc/ioports: 0376-0376 : 0000:00:1f.2 /proc/ioports: 0376-0376 : ata_piix /proc/ioports: 03c0-03df : vesafb /proc/ioports: 03f6-03f6 : 0000:00:1f.2 /proc/ioports: 03f6-03f6 : ata_piix /proc/ioports: 0400-041f : 0000:00:1f.3 /proc/ioports: 0480-04bf : pnp 00:07 /proc/ioports: 04d0-04d1 : pnp 00:07 /proc/ioports: 0800-087f : pnp 00:07 /proc/ioports: 0800-0803 : ACPI PM1a_EVT_BLK /proc/ioports: 0804-0805 : ACPI PM1a_CNT_BLK /proc/ioports: 0808-080b : ACPI PM_TMR /proc/ioports: 0828-082f : ACPI GPE0_BLK /proc/ioports: 0cf8-0cff : PCI conf1 /proc/ioports: 0d00-ffff : PCI Bus 0000:00 /proc/ioports: 1000-1fff : PCI Bus 0000:03 /proc/ioports: c000-cfff : PCI Bus 0000:01 /proc/ioports: d000-dfff : PCI Bus 0000:04 /proc/ioports: dc00-dcff : 0000:04:00.0 /proc/ioports: dc00-dcff : r8169 /proc/ioports: e480-e49f : 0000:00:1d.0 /proc/ioports: e480-e49f : uhci_hcd /proc/ioports: e800-e81f : 0000:00:1d.1 /proc/ioports: e800-e81f : uhci_hcd /proc/ioports: e880-e89f : 0000:00:1d.2 /proc/ioports: e880-e89f : uhci_hcd /proc/ioports: ec00-ec1f : 0000:00:1d.3 /proc/ioports: ec00-ec1f : uhci_hcd /proc/ioports: ec80-ec87 : 0000:00:02.0 /proc/ioports: ffa0-ffaf : 0000:00:1f.2 /proc/ioports: ffa0-ffaf : ata_piix /proc/iomem: 00000000-0000ffff : reserved /proc/iomem: 00010000-0009fbff : System RAM /proc/iomem: 0009fc00-0009ffff : reserved /proc/iomem: 000a0000-000bffff : PCI Bus 0000:00 /proc/iomem: 000a0000-000bffff : Video RAM area /proc/iomem: 000c0000-000c7fff : Video ROM /proc/iomem: 000d0000-000dffff : PCI Bus 0000:00 /proc/iomem: 000e0000-000fffff : reserved /proc/iomem: 000f0000-000fffff : System ROM /proc/iomem: 00100000-7f79ffff : System RAM /proc/iomem: 01000000-012861eb : Kernel code /proc/iomem: 012861ec-013ca77f : Kernel data /proc/iomem: 0143b000-014b7fff : Kernel bss /proc/iomem: 7f7a0000-7f7adfff : ACPI Tables /proc/iomem: 7f7ae000-7f7effff : ACPI Non-volatile Storage /proc/iomem: 7f7f0000-7f7fffff : reserved /proc/iomem: 7f800000-ffffffff : PCI Bus 0000:00 /proc/iomem: 7f800000-7f9fffff : PCI Bus 0000:03 /proc/iomem: 8c000000-8c01ffff : pnp 00:07 /proc/iomem: bbe00000-bfdfffff : PCI Bus 0000:01 /proc/iomem: bfe00000-bfefffff : PCI Bus 0000:04 /proc/iomem: bfef0000-bfefffff : 0000:04:00.0 /proc/iomem: bfef0000-bfefffff : r8169 /proc/iomem: d0000000-dfffffff : 0000:00:02.0 /proc/iomem: d0000000-d07affff : vesafb /proc/iomem: e0000000-e3ffffff : PCI MMCONFIG 0000 [bus 00-3f] /proc/iomem: e0000000-e3ffffff : pnp 00:0a /proc/iomem: fa700000-fe6fffff : PCI Bus 0000:01 /proc/iomem: fe700000-fe7fffff : PCI Bus 0000:03 /proc/iomem: fe7f0000-fe7fffff : 0000:03:00.0 /proc/iomem: fe7f0000-fe7fffff : 0000:03:00.0 /proc/iomem: fe800000-fe8fffff : PCI Bus 0000:04 /proc/iomem: fe8c0000-fe8dffff : 0000:04:00.0 /proc/iomem: fe8ff000-fe8fffff : 0000:04:00.0 /proc/iomem: fe8ff000-fe8fffff : r8169 /proc/iomem: fea80000-feafffff : 0000:00:02.1 /proc/iomem: feb38000-feb3bfff : 0000:00:1b.0 /proc/iomem: feb3fc00-feb3ffff : 0000:00:1d.7 /proc/iomem: feb3fc00-feb3ffff : ehci_hcd /proc/iomem: feb40000-feb7ffff : 0000:00:02.0 /proc/iomem: feb80000-febfffff : 0000:00:02.0 /proc/iomem: fec00000-fec003ff : IOAPIC 0 /proc/iomem: fed00000-fed003ff : HPET 0 /proc/iomem: fed13000-fed19fff : pnp 00:01 /proc/iomem: fed1c000-fed1ffff : pnp 00:07 /proc/iomem: fed20000-fed3ffff : pnp 00:07 /proc/iomem: fed50000-fed8ffff : pnp 00:07 /proc/iomem: fee00000-fee00fff : Local APIC /proc/iomem: fee00000-fee00fff : reserved /proc/iomem: fee00000-fee00fff : pnp 00:09 /proc/iomem: ffb00000-ffbfffff : pnp 00:07 /proc/iomem: fff00000-ffffffff : reserved /proc/iomem: fff00000-ffffffff : pnp 00:07 /proc/interrupts: CPU0 /proc/interrupts: 0: 11985 IO-APIC-edge timer /proc/interrupts: 1: 3 IO-APIC-edge i8042 /proc/interrupts: 8: 24 IO-APIC-edge rtc0 /proc/interrupts: 9: 0 IO-APIC-fasteoi acpi /proc/interrupts: 12: 3 IO-APIC-edge i8042 /proc/interrupts: 14: 85724 IO-APIC-edge ata_piix /proc/interrupts: 15: 0 IO-APIC-edge ata_piix /proc/interrupts: 16: 0 IO-APIC-fasteoi uhci_hcd:usb5 /proc/interrupts: 18: 0 IO-APIC-fasteoi uhci_hcd:usb4 /proc/interrupts: 19: 0 IO-APIC-fasteoi uhci_hcd:usb3 /proc/interrupts: 23: 18132 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2 /proc/interrupts: 43: 45181 PCI-MSI-edge eth0 /proc/interrupts: NMI: 444 Non-maskable interrupts /proc/interrupts: LOC: 246171 Local timer interrupts /proc/interrupts: SPU: 0 Spurious interrupts /proc/interrupts: PMI: 444 Performance monitoring interrupts /proc/interrupts: IWI: 0 IRQ work interrupts /proc/interrupts: ERR: 0 /proc/interrupts: MIS: 0 /proc/meminfo: MemTotal: 2065664 kB /proc/meminfo: MemFree: 1403428 kB /proc/meminfo: Buffers: 65624 kB /proc/meminfo: Cached: 525572 kB /proc/meminfo: SwapCached: 0 kB /proc/meminfo: Active: 296012 kB /proc/meminfo: Inactive: 313776 kB /proc/meminfo: Active(anon): 18604 kB /proc/meminfo: Inactive(anon): 28 kB /proc/meminfo: Active(file): 277408 kB /proc/meminfo: Inactive(file): 313748 kB /proc/meminfo: Unevictable: 0 kB /proc/meminfo: Mlocked: 0 kB /proc/meminfo: HighTotal: 1179272 kB /proc/meminfo: HighFree: 624992 kB /proc/meminfo: LowTotal: 886392 kB /proc/meminfo: LowFree: 778436 kB /proc/meminfo: SwapTotal: 3932156 kB /proc/meminfo: SwapFree: 3932156 kB /proc/meminfo: Dirty: 928 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 18612 kB /proc/meminfo: Mapped: 2252 kB /proc/meminfo: Shmem: 44 kB /proc/meminfo: Slab: 39144 kB /proc/meminfo: SReclaimable: 31012 kB /proc/meminfo: SUnreclaim: 8132 kB /proc/meminfo: KernelStack: 488 kB /proc/meminfo: PageTables: 356 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: WritebackTmp: 0 kB /proc/meminfo: CommitLimit: 4964988 kB /proc/meminfo: Committed_AS: 24112 kB /proc/meminfo: VmallocTotal: 122880 kB /proc/meminfo: VmallocUsed: 12488 kB /proc/meminfo: VmallocChunk: 109364 kB /proc/meminfo: HugePages_Total: 0 /proc/meminfo: HugePages_Free: 0 /proc/meminfo: HugePages_Rsvd: 0 /proc/meminfo: HugePages_Surp: 0 /proc/meminfo: Hugepagesize: 4096 kB /proc/meminfo: DirectMap4k: 909304 kB /proc/meminfo: DirectMap4M: 0 kB /proc/bus/input/devices: I: Bus=0003 Vendor=0a81 Product=0205 Version=0110 /proc/bus/input/devices: N: Name="CHESEN PS2 to USB Converter" /proc/bus/input/devices: P: Phys=usb-0000:00:1d.0-2/input0 /proc/bus/input/devices: S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input0 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=sysrq kbd /proc/bus/input/devices: B: PROP=0 /proc/bus/input/devices: B: EV=120013 /proc/bus/input/devices: B: KEY=10000 7 ff980000 7ff febeffdf ffefffff ffffffff fffffffe /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: B: LED=7 /proc/bus/input/devices: /proc/bus/input/devices: I: Bus=0003 Vendor=0a81 Product=0205 Version=0110 /proc/bus/input/devices: N: Name="CHESEN PS2 to USB Converter" /proc/bus/input/devices: P: Phys=usb-0000:00:1d.0-2/input1 /proc/bus/input/devices: S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input1 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=kbd mouse0 /proc/bus/input/devices: B: PROP=0 /proc/bus/input/devices: B: EV=17 /proc/bus/input/devices: B: KEY=400000 0 0 0 0 1f0000 0 2020000 7878 d811dc01 1e0000 0 0 0 /proc/bus/input/devices: B: REL=103 /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.2.0-3-686-pae (SMP w/2 CPU cores) Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
