On Sun, 2014-07-13 at 12:26 +0200, Bastien ROUCARIES wrote: Sorry the delay, I was procrastinating on responding because I'm wasn't really sure what to suggest.
> On Sun, Jul 13, 2014 at 9:39 AM, Ian Campbell <[email protected]> wrote: > > On Sun, 2014-07-13 at 00:58 +0200, Bastien ROUCARIES wrote: > >> On Sun, Jul 13, 2014 at 12:14 AM, Martin Michlmayr <[email protected]> wrote: > >> > * Bastien ROUCARIES <[email protected]> [2014-07-12 19:05]: > >> >> Hi UImage is too big to get into mtd :S You said that it it is a > >> >> trimmed down version ? Any idea to trim more ? > >> > > >> > I believe we said the initramfs generated by initramfs-tools is > >> > trimmed down. How big is the uimage and how much space do you have? > >> > >> 5242880 byte or 5M How big is the current uImage you are building? Looking at other similar installer images I'm guessing it's a little over 5M, so I'm wondering how much space we need to be clawing back. You will probably need to take a look through debian-installer.git/build/pkg-lists/* and the resulting list of udebs which are included in this image to see if there is anything which can be dropped to save some space. It might also be useful to unpack the initrd and see if you can spot anything which is unnecessary. Given that the kernels can now (I think) handle xz compressed initrd perhaps that might also be something to investigate? > > I always thought that this was the default behaviour of the > > network-console flavour images, is it not? > > No it is not. It ask for hostaname and password for ssh I didn't know this. As Martin says though it looks like oldsys-preseed is the fix. Looks at the code it looks like even without the machine specific hooks it should be enough to preseed the networking (letting DHCP take precedence) and set a default password, but it will be aborting because it doesn't recognise the platform. So at a minimum you will need to make it recognise your platform allowing it to take the default actions, but since there is a stanza there for DNS-323 though you might want to consider adding full support for grabbing the existing firmware cfg for DNS-320 too. Ian. -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: https://lists.debian.org/[email protected]
