Package: installation-reports
Boot method: CD
Image version: Daily netinst kfreebsd-amd64 as of 2014-09-21 from
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/kfreebsd-amd64/iso-cd/
Date: 2014-09-21 17:15 CEST
Machine: noname
Processor: Athlon64 X2
Memory: 3GByte
Partitions:
Disk /dev/ada0: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000919f8
Device Boot Start End Blocks Id System
/dev/ada0p1 63 5863724 2931831 82 Linux swap / Solaris
/dev/ada0p2 * 5863725 103521928 48829102 a5 FreeBSD
/dev/ada0p3 103522860 144541695 20509418 7 HPFS/NTFS/exFAT
/dev/ada0p4 201182056 488392064 143605004+ f W95 Ext'd (LBA)
/dev/ada0p5 201182058 214853309 6835626 83 Linux
/dev/ada0p6 214853373 299676509 42411568+ 7 HPFS/NTFS/exFAT
/dev/ada0p7 299676573 480632669 90478048+ 83 Linux
/dev/ada0p8 480632733 488392064 3879666 82 Linux swap / Solaris
last_lba(): I don't know how to handle files with mode 20640
Output of lspci -knn (or lspci -nn):
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP67 Memory Controller
[10de:0547] (rev a2)
00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP67 ISA Bridge [10de:0548] (rev
a2)
00:01.1 SMBus [0c05]: NVIDIA Corporation MCP67 SMBus [10de:0542] (rev a2)
00:01.2 RAM memory [0500]: NVIDIA Corporation MCP67 Memory Controller
[10de:0541] (rev a2)
00:02.0 USB controller [0c03]: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller
[10de:055e] (rev a2)
00:02.1 USB controller [0c03]: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller
[10de:055f] (rev a2)
00:04.0 USB controller [0c03]: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller
[10de:055e] (rev a2)
00:04.1 USB controller [0c03]: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller
[10de:055f] (rev a2)
00:06.0 IDE interface [0101]: NVIDIA Corporation MCP67 IDE Controller
[10de:0560] (rev a1)
00:07.0 Audio device [0403]: NVIDIA Corporation MCP67 High Definition Audio
[10de:055c] (rev a1)
00:08.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Bridge [10de:0561] (rev
a2)
00:09.0 SATA controller [0106]: NVIDIA Corporation MCP67 AHCI Controller
[10de:0554] (rev a2)
00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge
[10de:0562] (rev a2)
00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge
[10de:0563] (rev a2)
00:0d.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge
[10de:0563] (rev a2)
00:0e.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge
[10de:0563] (rev a2)
00:0f.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge
[10de:0563] (rev a2)
00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge
[10de:0563] (rev a2)
00:11.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge
[10de:0563] (rev a2)
00:12.0 VGA compatible controller [0300]: NVIDIA Corporation C68 [GeForce 7025
/ nForce 630a] [10de:053e] (rev a2)
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [E]
Overall install: [O]
Comments/Problems:
Installation itself was OK, with some errors in the installed system:
- grub-install did not recognize Ubuntu 9.04 and Windows XP on the disk
due to deficency of os-prober
- X server did not recognize optimal screen resolution
(1024x768 instead of 1280x1024), no way to change that
- xterminal of XFCE4 desktop used US keymap, got to change it manually
- german keymap is mostly OK, except Y and Z are exchanged (as in US map)
- console (Alt-F1) used DE keymap, but no way to compose special characters
like backslash or "@" with AltGr+key
- unable to mount ext2/3 file systems: error message "/dev/ada0s7: no such
device", but e.g. dd can read from /dev/ada0s7
- unable to mount NTFS filesystem (after installing ntfs-3g): unable to
read a NTFS bitmap. But I can mount the VFAT filesystem of an USB stick
So, to be usable for day to ay work, kFreeBSD needs some polish
--
Herbert Kaminski D-26122 Oldenburg
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/20140921234952.331489f6@toshi
