Your message dated Wed, 11 Jan 2017 06:03:29 +0000 with message-id <[email protected]> and subject line Bug#789886: fixed in flash-kernel 3.74 has caused the Debian Bug report #789886, regarding linux-image-3.2.0-4-kirkwood: Couldn't find /usr/lib/linux-image-3.2.0-4-kirkwood/kirkwood-sheevaplug.dtbzDear Maintainer, to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 789886: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=789886 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: src:linux Version: 3.2.68-1+deb7u2 Severity: important When I upgrade this package on my Debian Wheezy Sheevaplug, I get this error: Couldn't find /usr/lib/linux-image-3.2.0-4-kirkwood/kirkwood-sheevaplug.dtb and the installation stops. Full log: root@phones:/boot# !451 [326/621] apt-get install --reinstall linux-image-3.2.0-4-kirkwood Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libtonezone2.0 libts-0.0-0 tsconf Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 106 not upgraded. Need to get 0 B/15.3 MB of archives. After this operation, 0 B of additional disk space will be used. Preconfiguring packages ... (Reading database ... 32692 files and directories currently installed.) Preparing to unpack .../linux-image-3.2.0-4-kirkwood_3.2.68-1+deb7u2_armel.deb ... Unpacking linux-image-3.2.0-4-kirkwood (3.2.68-1+deb7u2) over (3.2.68-1+deb7u2) ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-4-kirkwood /boot/vmlinuz-3.2.0-4-kirkw ood run-parts: executing /etc/kernel/postrm.d/zz-flash-kernel 3.2.0-4-kirkwood /boot/vmlinuz-3.2.0-4-kirkw ood Setting up linux-image-3.2.0-4-kirkwood (3.2.68-1+deb7u2) ... Running depmod. Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-4-kirkwood /boot/vmlinuz-3.2.0-4-kir kwood update-initramfs: Generating /boot/initrd.img-3.2.0-4-kirkwood /usr/lib/linux-image-3.2.0-4-kirkwood/kirkwood-sheevaplug.dtb not found /usr/lib/linux-image-3.2.0-4-kirkwood/kirkwood-sheevaplug.dtb not found flash-kernel: deferring update (trigger activated) run-parts: executing /etc/kernel/postinst.d/zz-flash-kernel 3.2.0-4-kirkwood /boot/vmlinuz-3.2.0-4-kir kwood /usr/lib/linux-image-3.2.0-4-kirkwood/kirkwood-sheevaplug.dtb not found /usr/lib/linux-image-3.2.0-4-kirkwood/kirkwood-sheevaplug.dtb not found flash-kernel: deferring update (trigger activated) run-parts: executing /etc/kernel/postinst.d/zz-flash-kernel 3.2.0-4-kirkwood /boot/vmlinuz-3.2.0-4-kir kwood /usr/lib/linux-image-3.2.0-4-kirkwood/kirkwood-sheevaplug.dtb not found /usr/lib/linux-image-3.2.0-4-kirkwood/kirkwood-sheevaplug.dtb not found flash-kernel: deferring update (trigger activated) Processing triggers for flash-kernel (3.35) ... /usr/lib/linux-image-3.2.0-4-kirkwood/kirkwood-sheevaplug.dtb not found flash-kernel: installing version 3.2.0-4-kirkwood Generating kernel u-boot image... done. Taking backup of uImage. Installing new uImage. Generating initramfs u-boot image... done. Taking backup of uInitrd. Installing new uInitrd. Couldn't find /usr/lib/linux-image-3.2.0-4-kirkwood/kirkwood-sheevaplug.dtb dpkg: error processing package flash-kernel (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: flash-kernel E: Sub-process /usr/bin/dpkg returned an error code (1) root@phones:/boot# Please let me know if you need more info. Thanks, Jesse Adelman -- Package-specific info: ** Version: Linux version 3.2.0-4-kirkwood ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.68-1+deb7u1 ** Command line: console=ttyS0,115200 rootdelay=15 ** Not tainted ** Kernel log: [ 17.678247] 0x000000000000-0x000000100000 : "u-boot" [ 17.684058] 0x000000100000-0x000000500000 : "uImage" [ 17.689853] 0x000000500000-0x000020000000 : "root" [ 17.696492] mousedev: PS/2 mouse device common for all mice [ 17.702460] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 [ 17.708396] i2c /dev entries driver [ 17.712099] cpuidle: using governor ladder [ 17.716279] cpuidle: using governor menu [ 17.720386] Registered led device: plug:red:misc [ 17.720486] Registered led device: plug:green:health [ 17.721249] TCP cubic registered [ 17.724494] NET: Registered protocol family 17 [ 17.728969] Registering the dns_resolver key type [ 17.733763] Gating clock of unused units [ 17.733772] before: 0x00dfc3fd [ 17.733779] after: 0x00c701d9 [ 17.734216] registered taskstats version 1 [ 17.738725] rtc-mv rtc-mv: setting system clock to 2018-12-11 22:44:56 UTC (1544568296) [ 17.746829] Initializing network drop monitor service [ 17.752531] Freeing init memory: 144K [ 17.820741] udevd[47]: starting version 175 [ 17.905635] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 17.961990] mv643xx_eth smi: probed [ 17.979312] usbcore: registered new interface driver usbfs [ 18.009838] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:50:43:01:56:80 [ 18.046239] mmc0: mvsdio driver initialized, lacking card detect (fall back to polling) [ 18.057053] usbcore: registered new interface driver hub [ 18.081914] usbcore: registered new device driver usb [ 18.088879] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 18.144292] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 18.149594] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 18.200201] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 18.220167] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 18.226179] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 18.233024] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.240295] usb usb1: Product: Marvell Orion EHCI [ 18.245016] usb usb1: Manufacturer: Linux 3.2.0-4-kirkwood ehci_hcd [ 18.251323] usb usb1: SerialNumber: orion-ehci.0 [ 18.256862] hub 1-0:1.0: USB hub found [ 18.260662] hub 1-0:1.0: 1 port detected [ 18.580181] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 18.732845] usb 1-1: New USB device found, idVendor=13fe, idProduct=1d00 [ 18.739582] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 18.746763] usb 1-1: Product: USB PD 2.0 [ 18.751237] usb 1-1: Manufacturer: [ 18.755441] usb 1-1: SerialNumber: 07740C6103F4 [ 18.784256] SCSI subsystem initialized [ 18.792730] Initializing USB Mass Storage driver... [ 18.797921] scsi0 : usb-storage 1-1:1.0 [ 18.803277] usbcore: registered new interface driver usb-storage [ 18.809312] USB Mass Storage support registered. [ 19.801188] scsi 0:0:0:0: Direct-Access USB PD 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 19.824393] sd 0:0:0:0: [sda] 8060928 512-byte logical blocks: (4.12 GB/3.84 GiB) [ 19.832368] sd 0:0:0:0: [sda] Write Protect is off [ 19.837186] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 19.837616] sd 0:0:0:0: [sda] No Caching mode page found [ 19.842962] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 19.852743] sd 0:0:0:0: [sda] No Caching mode page found [ 19.858086] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 19.865627] sda: sda1 sda2 < sda5 > [ 19.872491] sd 0:0:0:0: [sda] No Caching mode page found [ 19.877828] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 19.883970] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 19.897970] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 33.298925] device-mapper: uevent: version 1.0.3 [ 33.305404] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [ 36.067287] EXT3-fs (dm-0): recovery required on readonly filesystem [ 36.073708] EXT3-fs (dm-0): write access will be enabled during recovery [ 41.551451] kjournald starting. Commit interval 5 seconds [ 41.557009] EXT3-fs (dm-0): recovery complete [ 41.855379] EXT3-fs (dm-0): mounted filesystem with ordered data mode [ 42.821614] udevd[243]: starting version 175 [ 48.500809] EXT3-fs (dm-0): using internal journal [ 48.618654] loop: module loaded [ 52.524101] Adding 233468k swap on /dev/mapper/phones-swap_1. Priority:-1 extents:1 across:233468k [ 86.981963] kjournald starting. Commit interval 30 seconds [ 87.262529] EXT3-fs (dm-5): using internal journal [ 87.267346] EXT3-fs (dm-5): mounted filesystem with ordered data mode [ 87.276955] kjournald starting. Commit interval 30 seconds [ 87.522677] EXT3-fs (dm-4): using internal journal [ 87.527498] EXT3-fs (dm-4): mounted filesystem with ordered data mode [ 87.544581] kjournald starting. Commit interval 30 seconds [ 87.554012] EXT3-fs (dm-2): using internal journal [ 87.558829] EXT3-fs (dm-2): mounted filesystem with ordered data mode [ 87.575573] kjournald starting. Commit interval 30 seconds [ 87.585136] EXT3-fs (dm-3): using internal journal [ 87.589950] EXT3-fs (dm-3): mounted filesystem with ordered data mode [ 89.124804] NET: Registered protocol family 10 [ 89.131822] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 90.086038] RPC: Registered named UNIX socket transport module. [ 90.092026] RPC: Registered udp transport module. [ 90.096752] RPC: Registered tcp transport module. [ 90.101494] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 90.132407] FS-Cache: Loaded [ 90.194064] FS-Cache: Netfs 'nfs' registered for caching [ 90.230713] Installing knfsd (copyright (C) 1996 [email protected]). [ 91.896893] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 91.907055] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 102.840161] eth0: no IPv6 routers present [ 115.930165] sched: RT throttling activated ** Model information Processor : Feroceon 88FR131 rev 1 (v5l) Hardware : Marvell SheevaPlug Reference Board Revision : 0000 ** Loaded modules: ext2 nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ipv6 loop hmac sha1_generic mv_cesa aes_generic ext3 mbcache jbd dm_mod sg sd_mod crc_t10dif usb_storage scsi_mod ehci_hcd usbcore mvsdio mmc_core usb_common mv643xx_eth inet_lro libphy ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 192.168.111.57 netmask 255.255.255.0 gateway 192.168.111.1 auto eth0:1 iface eth0:1 inet static address 192.168.111.53 netmask 255.255.255.0 gateway 192.168.111.1 auto eth0:2 iface eth0:2 inet static address 192.168.111.52 netmask 255.255.255.0 gateway 192.168.111.1 auto eth0:3 iface eth0:3 inet static address 192.168.111.58 netmask 255.255.255.0 gateway 192.168.111.1 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:50:43:01:56:80 brd ff:ff:ff:ff:ff:ff inet 192.168.111.53/24 brd 192.168.111.255 scope global eth0:1 inet 192.168.111.57/24 brd 192.168.111.255 scope global secondary eth0 inet 192.168.111.52/24 brd 192.168.111.255 scope global secondary eth0:2 inet 192.168.111.58/24 brd 192.168.111.255 scope global secondary eth0:3 inet6 fe80::250:43ff:fe01:5680/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 7725 22 0 0 0 0 0 0 7725 22 0 0 0 0 0 0 eth0: 46369147 65159 0 0 0 0 0 0 16278115 43193 0 0 0 0 0 0 *** Protocol statistics: Ip: 57628 total packets received 504 with invalid addresses 0 forwarded 0 incoming packets discarded 57124 incoming packets delivered 37253 requests sent out Icmp: 1494 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 34 echo requests: 1460 1474 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 14 echo replies: 1460 IcmpMsg: InType3: 34 InType8: 1460 OutType0: 1460 OutType3: 14 Tcp: 230 active connections openings 1004 passive connection openings 41 failed connection attempts 63 connection resets received 21 connections established 50464 segments received 38054 segments send out 972 segments retransmited 2 bad segments received. 81 resets sent Udp: 778 packets received 0 packets to unknown port received. 0 packet receive errors 1063 packets sent UdpLite: TcpExt: 49 invalid SYN cookies received 35 resets received for embryonic SYN_RECV sockets 235 TCP sockets finished time wait in fast timer 1 packets rejects in established connections because of timestamp 1673 delayed acks sent 2 delayed acks further delayed because of locked socket Quick ack mode was activated 57 times 24527 packet headers predicted 9294 acknowledgments not containing data payload received 5834 predicted acknowledgments 22 times recovered from packet loss by selective acknowledgements 20 congestion windows recovered without slow start by DSACK 36 congestion windows recovered without slow start after partial ack 36 TCP data loss events TCPLostRetransmit: 2 11 timeouts after SACK recovery 3 timeouts in loss state 41 fast retransmits 2 forward retransmits 19 retransmits in slow start 487 other TCP timeouts 1 SACK retransmits failed 66 DSACKs sent for old packets 1 DSACKs sent for out of order packets 92 DSACKs received 5 connections reset due to unexpected data 16 connections reset due to early user close 48 connections aborted due to timeout TCPDSACKIgnoredOld: 7 TCPDSACKIgnoredNoUndo: 28 TCPSpuriousRTOs: 2 TCPSackShifted: 80 TCPSackMerged: 96 TCPSackShiftFallback: 77 TCPChallengeACK: 4 TCPSYNChallenge: 2 IpExt: InBcastPkts: 4388 InOctets: 44856416 OutOctets: 15453109 InBcastOctets: 899760 ** PCI devices: ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 13fe:1d00 Kingston Technology Company Inc. DataTraveler 2.0 1GB/4GB Flash Drive / Patriot Xporter 4GB Flash Drive -- System Information: Debian Release: 8.1 APT prefers oldstable-updates APT policy: (500, 'oldstable-updates'), (500, 'stable'), (500, 'oldstable') Architecture: armel (armv5tel) Kernel: Linux 3.2.0-4-kirkwood Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: sysvinit (via /sbin/init) Versions of packages linux-image-3.2.0-4-kirkwood depends on: ii debconf [debconf-2.0] 1.5.56 ii initramfs-tools [linux-initramfs-tool] 0.109.1 ii kmod 18-3 ii linux-base 3.5 ii module-init-tools 18-3 Versions of packages linux-image-3.2.0-4-kirkwood recommends: pn firmware-linux-free <none> ii uboot-mkimage 2012.04.01-2 Versions of packages linux-image-3.2.0-4-kirkwood suggests: pn debian-kernel-handbook <none> pn fdutils <none> pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-kirkwood is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-kirkwood/postinst/missing-firmware-3.2.0-4-kirkwood: linux-image-3.2.0-4-kirkwood/prerm/removing-running-kernel-3.2.0-4-kirkwood: true linux-image-3.2.0-4-kirkwood/postinst/ignoring-ramdisk: linux-image-3.2.0-4-kirkwood/postinst/depmod-error-initrd-3.2.0-4-kirkwood: false
--- End Message ---
--- Begin Message ---Source: flash-kernel Source-Version: 3.74 We believe that the bug you reported is fixed in the latest version of flash-kernel, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to [email protected], and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Christian Perrier <[email protected]> (supplier of updated flash-kernel package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing [email protected]) -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 1.8 Date: Wed, 11 Jan 2017 05:48:07 +0100 Source: flash-kernel Binary: flash-kernel flash-kernel-installer Architecture: source armel Version: 3.74 Distribution: unstable Urgency: medium Maintainer: Debian Install System Team <[email protected]> Changed-By: Christian Perrier <[email protected]> Description: flash-kernel - utility to make certain embedded devices bootable flash-kernel-installer - Make the system bootable (udeb) Closes: 789886 836679 845779 Changes: flash-kernel (3.74) unstable; urgency=medium . [ Martin Michlmayr ] * Add machine db entry for Marvell ESPRESSOBin. * Only create DTB boot file on kernels that require DTB (Closes: #789886) * Improve error message when DTB is missing by showing the search path for DTB (Closes: #836679) . [ Heinrich Schuchardt ] * Call mkimage with correct architecture (Closes: #845779) Checksums-Sha1: 255dfcc8f9fbd2a1ede08952a42aba7f928bc21f 1859 flash-kernel_3.74.dsc 869988e9997275f2e2f880c317acbfa0680dbd42 68628 flash-kernel_3.74.tar.xz f4146efedaeba1fe6a8ea429eaa6e715a4831577 25674 flash-kernel-installer_3.74_armel.udeb 8a9d73437dda912554fa9fe7fe45315d01f4fe51 4929 flash-kernel_3.74_armel.buildinfo 44a5032f36d53d60ea32bac55ae17e52d6c2b935 45276 flash-kernel_3.74_armel.deb Checksums-Sha256: a1383a29b47b7dfd0f67f185ebaf6b2684fb7fe37dd57ca1d02809e3cabcbd52 1859 flash-kernel_3.74.dsc 79dea0248999d4e384121c6dbe0abbbd9b05c2059e523d586525ebbacce6c9f0 68628 flash-kernel_3.74.tar.xz bf3c19a642394c25672b97aacb6d3ee3d195cd30bbb7098cae9850ad8e5775f7 25674 flash-kernel-installer_3.74_armel.udeb 7d32537fb8f05b78c4514531537dc0366b8a8adad590611d469b2be7a05e3205 4929 flash-kernel_3.74_armel.buildinfo cd82bae71a78187976f2c1bede78b0854054b3309b86a439d1a83fdada3a921c 45276 flash-kernel_3.74_armel.deb Files: cb847bccf5f829a6a44838dd507d7830 1859 utils optional flash-kernel_3.74.dsc eea9a3f7e5248bc1b9db8007f2eb07a5 68628 utils optional flash-kernel_3.74.tar.xz d97ecba735e92b8caf1456ac74cf8161 25674 debian-installer standard flash-kernel-installer_3.74_armel.udeb 6df94026ab9a103565ee7c70a80d0de2 4929 utils optional flash-kernel_3.74_armel.buildinfo 35fcb60f9f60c710baadeef7e7bcb339 45276 utils optional flash-kernel_3.74_armel.deb -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAEBCAAGBQJYdcd/AAoJEIcvcCxNbiWomscQAKhlnJiZe71HZdrXgdz8BXTb 9lWJ0W2eWtq7FCXL6C0omdd707WQOas87Un/LR8FZAXu57WUEGPCLfCQZBjKnttn baTeL8w7/vHwF08EK2GCa1y0iBh6augDt2uCUsjv7xILuNhC4B0SZVPUnYlcX57H PdwDR8F7q0Lbv1EFBD1FQHWFw0YsVhn+3NQV3pXc9aXJTPS6tO8hq00VWqsvmPAv I1PP1GDDJM29/AtLCQEICdTxpvdGOypF02tv0Ve64YW++MsJxuu6PQdwBS0b8U9H x4KHjwqMw4IVwQ2SFD+do3TtsLRz8ePa+06Zuk/dmRt2130Eke6CWahlxW9fLAAb btuFd4WGI/oApPNMUnlM7c952Bii0CeQGpJo62Wh+5/P7FGCaM6ZfU6RTcQWE3SG jJb64Qgo1ZKwd8ebC9OwMFQKCBgNWN0ZZHIcytR9vfhzQ1NYP6V7NAiGkpdZ8ndE jmtGAgcoMhGnu3jhmDistllvaA48zjy8A4YkQmjSlYzyYixcPJ4UGk3BHF9nOavm Snyf1CUsWWPdGC8zd9Ea2PqvYTLWXCKngKh4o1wFRd0y9eGnKmeiXdsWPmG1IkJn kgdffPuIjUVhwh8un/JSPvGKVdrq9Dnht1fmlq7X9WsdgYunRCkGCp8HYiOWcHbf 66SKvKA1qzLQfmnWXnkE =nnGr -----END PGP SIGNATURE-----
--- End Message ---
