Package: installation-reports

Boot method: Mounted netinst .iso as a CD in VirtualBox
Image version: debian-stretch-DI-rc1-amd64-netinst.iso
Date: 2017-01-30 16:00

Machine: Host: HP EliteDesk 800 G1 TWR, Guest: VirtualBox, 2 CPU, 4096
MB RAM, 10 GB virtual SSD
Processor:
Memory: Host: 16 GB, Guest: 4 GB
Partitions:

~ # fdisk -l

Disk /dev/sda: 10 GiB, 10737418240 bytes, 20971520 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disklabel type: dos

Disk identifier: 0x2dafbe27

Device     Boot  Start      End  Sectors  Size Id Type

/dev/sda1  *      2048   499711   497664  243M 83 Linux

/dev/sda2       501758 20969471 20467714  9.8G  5 Extended

/dev/sda5       501760 20969471 20467712  9.8G 8e Linux LVM


Disk /dev/mapper/biobank--collab--vg-root: 5.8 GiB, 6182404096 bytes,
12075008 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes




Disk /dev/mapper/biobank--collab--vg-swap_1: 4 GiB, 4294967296 bytes,
8388608 sectors

Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/dm-2: 9.8 GiB, 10479468544 bytes, 20467712 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes




Output of lspci -knn (or lspci -nn):

00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC
[Natoma] [8086:1237] (rev 02)

00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA
[Natoma/Triton II] [8086:7000]

00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4
IDE [8086:7111] (rev 01)

        Kernel driver in use: ata_piix

        Kernel modules: ata_piix, ata_generic

00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH
VirtualBox Graphics Adapter [80ee:beef]

00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit
Ethernet Controller [8086:100e] (rev 02)

        Subsystem: Intel Corporation Device [8086:001e]

        Kernel driver in use: e1000

        Kernel modules: e1000

00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH
VirtualBox Guest Service [80ee:cafe]

00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA
AC'97 Audio Controller [8086:2415] (rev 01)

        Subsystem: Dell Device [1028:0177]

00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI
[8086:7113] (rev 08)

00:0c.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series
Chipset Family USB xHCI Host Controller [8086:1e31]

        Kernel driver in use: xhci_hcd

        Kernel modules: xhci_pci

00:0d.0 SATA controller [0106]: Intel Corporation 82801HM/HEM
(ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 02)

        Kernel driver in use: ahci

        Kernel modules: ahci


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [E]
Overall install:        [ ]

Comments/Problems:

<Description of the install, in prose, and any thoughts, comments
      and ideas you had during the initial install.>

Using VirtualBox 5.1.6 on a Windows 7 host, I created a virtual
machine with the described above specifications, and inserted the
Debian Stretch RC1 netinst .iso file as a CD.

I tried both the graphical and the text mode installer - the result
was same in both.

I selected the default en_us options except for Finnish keyboard
layout and Finland as the physical location. In the disk partitioning
part I selected the guided LVM option, and from there, all the default
options.

For the installable software I only selected the SSH server and the
base system tools (and unselected the desktop environment).

For the GRUB installation I selected the /sda option from the two
available options: Manual and /sda

The installation hangs at 66% "Installing GRUB boot loader" with the
text Running "update-grub"...

Reply via email to