Your message dated Sun, 14 May 2017 11:43:00 +0000 with message-id <[email protected]> and subject line Closing bug report has caused the Debian Bug report #267992, regarding no lvm support for powerpc to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 267992: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=267992 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: installation-reports INSTALL REPORT Debian-installer-version: rc1 uname -a: Linux mac 2.6.7-powerpc #1 Sat Jul 10 03:47:45 CEST 2004 ppc GNU/Linux Date: Wed Aug 25 22:32:11 EST 2004 Method: netinst CD Machine: PowerBook G4 Processor: PowerPC G4 Memory: 512M Root Device: IDE /dev/hda Root Size/partition table: /dev/hda # type name length base ( size ) system /dev/hda1 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map /dev/hda2 Apple_HFS Apple_HFS_Untitled_2 83623936 @ 262208 ( 39.9G) HFS /dev/hda3 Apple_Bootstrap bootstrap 1602 @ 64 (801.0k) NewWorld bootblock /dev/hda4 Apple_Free Extra 260542 @ 1666 (127.2M) Free space /dev/hda5 Apple_UNIX_SVR2 swap 1000001 @ 84886145 (488.3M) Linux swap /dev/hda6 Apple_UNIX_SVR2 root 39062501 @ 85886146 ( 18.6G) Linux native /dev/hda7 Apple_Free Extra 1000001 @ 83886144 (488.3M) Free space /dev/hda8 Apple_Free Extra 31352841 @ 124948647 ( 15.0G) Free space Block size=512, Number of Blocks=156301488 DeviceType=0x0, DeviceId=0x0 Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/hda6 ext3 19225040 227180 18021376 2% / tmpfs tmpfs 258080 0 258080 0% /dev/shm Output of lspci and lspci -n: 0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP 0000:00:10.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] 0001:01:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI 0001:01:12.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) 0001:01:13.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller 0001:01:17.0 ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O 0001:01:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:01:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:01:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:01:1b.0 USB Controller: NEC Corporation USB (rev 43) 0001:01:1b.1 USB Controller: NEC Corporation USB (rev 43) 0001:01:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04) 0002:06:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI 0002:06:0d.0 ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100 0002:06:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81) 0002:06:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80) 0000:00:0b.0 0600: 106b:0034 0000:00:10.0 0300: 1002:4e50 0001:01:0b.0 0600: 106b:0035 0001:01:12.0 0280: 14e4:4320 (rev 03) 0001:01:13.0 0607: 104c:ac56 0001:01:17.0 ff00: 106b:003e 0001:01:18.0 0c03: 106b:003f 0001:01:19.0 0c03: 106b:003f 0001:01:1a.0 0c03: 106b:003f 0001:01:1b.0 0c03: 1033:0035 (rev 43) 0001:01:1b.1 0c03: 1033:0035 (rev 43) 0001:01:1b.2 0c03: 1033:00e0 (rev 04) 0002:06:0b.0 0600: 106b:0036 0002:06:0d.0 ff00: 106b:003b 0002:06:0e.0 0c00: 106b:0031 (rev 81) 0002:06:0f.0 0200: 106b:0032 (rev 80) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: When partitioning, I wasn't given an option to create an LVM physical volume :-( Other than that, everything went fine. base-config asked me about a proxy server twice, as per i386 (no surprises there).
--- End Message ---
--- Begin Message ---Hi! I'm closing this bug, since it was tagged "moreinfo" for more than ten years without an answer. If you still encounter this problem, please feel free to re-open it or ask me to do it. Thanks for your contribution!
--- End Message ---
