Hi, Disclaimer: I'm neither part of Debian's boot nor kernel team.
Here is some feedback: On Tue, Feb 05, 2019 at 01:55:27PM +0100, Alexandre GRIVEAUX wrote: > Adding definition according to: > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts?h=v4.20 > https://packages.debian.org/stretch/armhf/linux-image-4.9.0-8-armmp/filelist > https://packages.debian.org/stretch/arm64/linux-image-4.9.0-8-arm64/filelist > > A merge request was opened 1 month ago but without reply on: > > https://salsa.debian.org/installer-team/flash-kernel > --- > db/all.db | 63 > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 63 insertions(+) > > diff --git a/db/all.db b/db/all.db > index 6197d08..4b01b31 100644 > --- a/db/all.db > +++ b/db/all.db > @@ -1474,6 +1474,62 @@ Boot-Script-Path: /boot/boot.scr > U-Boot-Script-Name: bootscr.uboot-generic > Required-Packages: u-boot-tools > > +Machine: Raspberry Pi 1 Model A > +Kernel-Flavors: armmp armmp-lpae > +DTB-Id: bcm2835-rpi-a.dtb > +U-Boot-Script-Name: bootscr.uboot-generic > +Required-Packages: u-boot-tools > +Boot-Script-Path: /boot/boot.scr armmp is only build for armhf, which means ARMv7 in Debian. RPi 1 is ARMv6, so this is not a safe operation in Debian. Note, that Raspbian uses a different definition of armhf. > +Machine: Raspberry Pi 1 Model A+ > +Kernel-Flavors: armmp armmp-lpae > +DTB-Id: bcm2835-rpi-a-plus.dtb > +U-Boot-Script-Name: bootscr.uboot-generic > +Required-Packages: u-boot-tools > +Boot-Script-Path: /boot/boot.scr The above is obviously true for all RPi 1 entries. > +Machine: Raspberry Pi 1 Model B > +Kernel-Flavors: armmp armmp-lpae > +DTB-Id: bcm2836-rpi-2-b.dtb This is RPi 2 DT, but your description claims RPi 1. RPi 2 is already supported, so this can be dropped? > +U-Boot-Script-Name: bootscr.uboot-generic > +Required-Packages: u-boot-tools > +Boot-Script-Path: /boot/boot.scr > + > +Machine: Raspberry Pi 1 Model B+ > +Kernel-Flavors: armmp armmp-lpae > +DTB-Id: bcm2835-rpi-b-plus.dtb > +U-Boot-Script-Name: bootscr.uboot-generic > +Required-Packages: u-boot-tools > +Boot-Script-Path: /boot/boot.scr > + > +Machine: Raspberry Pi 1 Model B Rev2 > +Kernel-Flavors: armmp armmp-lpae > +DTB-Id: bcm2835-rpi-b-rev2.dtb > +U-Boot-Script-Name: bootscr.uboot-generic > +Required-Packages: u-boot-tools > +Boot-Script-Path: /boot/boot.scr > + > +Machine: Raspberry Pi 1 Compute Module > +Kernel-Flavors: armmp armmp-lpae > +DTB-Id: bcm2835-rpi-cm1-io1.dtb > +U-Boot-Script-Name: bootscr.uboot-generic > +Required-Packages: u-boot-tools > +Boot-Script-Path: /boot/boot.scr > + > +Machine: Raspberry Pi Zero > +Kernel-Flavors: armmp armmp-lpae > +DTB-Id: bcm2835-rpi-zero.dtb > +U-Boot-Script-Name: bootscr.uboot-generic > +Required-Packages: u-boot-tools > +Boot-Script-Path: /boot/boot.scr > + > +Machine: Raspberry Pi Zero W > +Kernel-Flavors: armmp armmp-lpae > +DTB-Id: bcm2835-rpi-zero-w.dtb > +U-Boot-Script-Name: bootscr.uboot-generic > +Required-Packages: u-boot-tools > +Boot-Script-Path: /boot/boot.scr > + > Machine: Raspberry Pi 2 Model B > Kernel-Flavors: armmp armmp-lpae > DTB-Id: bcm2836-rpi-2-b.dtb > @@ -1495,6 +1551,13 @@ U-Boot-Script-Name: bootscr.uboot-generic > Required-Packages: u-boot-tools > Boot-Script-Path: /boot/boot.scr > > +Machine: Raspberry Pi 3 Compute Module > +Kernel-Flavors: arm64 armmp armmp-lpae > +DTB-Id: bcm2835-rpi-cm3-io3.dtb > +U-Boot-Script-Name: bootscr.uboot-generic > +Required-Packages: u-boot-tools > +Boot-Script-Path: /boot/boot.scr This seems to be a sensible addition, but the DT file for this module is actually bcm2837-rpi-cm3-io3.dtb. I suppose you did not test your changes? > + > Machine: Rockchip RK3288 Tinker Board > Kernel-Flavors: armmp armmp-lpae > DTB-Id: rk3288-tinker.dtb -- Sebastian
