Am Mit, den 31.12.2003 schrieb Harald Dunkel um 13:53: > Hi folks, > > Using the Sarge netinst CD of yesterday I tried to install > Debian on a SCSI disk. > > d-i gave me an unusual sequence of SCSI drives to select > the boot disk from. Here is the list of disks as presented > by d-i: > > /dev/scsi/host1/bus0/target0/lun0/disc (USB disc) > /dev/scsi/host3/bus0/target0/lun0/disc (disc 1) > /dev/scsi/host3/bus0/target1/lun0/disc (disc 2) > > I selected disc 2 to install Sarge. Installation went fine. > But after a reboot the final sequence of discs was different: > > /dev/sda disc 1 > /dev/sdb disc 2 > /dev/sdc USB disc
Probably the installer loaded usb-storage before the module for your SCSI controller and the module loading order on the installed system was the other way around. We had the same problem with switched NIC's. It's probably quite tricky to solve this. Gaudenz -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
