Package: installation-reports

INSTALL REPORT

Debian-installer-version: 
 Debian GNU/Linux testing "Sarge" Official BusinessCard 
 Snapshot i386 Binary-1 (20040111)
 
http://people.debian.org/cdimage/testing/sid_d-i/netinst/i386/20040111/sarge-i386-businesscard.iso
uname -a: Linux kukkaruukku 2.4.24-1-686 #1 Tue Jan 6 21:29:44 EST 2004 i686 GNU/Linux
Date: 2004-01-14T04:00+0200
Method: Booted off CD-RW, pressed ENTER at boot prompt
        Used mirror ftp.fi.debian.org, no proxy
Machine: No-brand desktop
Processor: Pentium III (Coppermine) 1 GHz
Memory: 256 MB
Root Device: /dev/hdb (regular sid install in /dev/hda, disconnected
 during the install attempt as a safety measure)
Root Size/partition table: 
 Disk /dev/hdb: 81.9 GB, 81964302336 bytes
 16 heads, 63 sectors/track, 158816 cylinders
 Units = cylinders of 1008 * 512 = 516096 bytes
 Device Boot      Start         End      Blocks   Id  System
    /dev/hdb1               1        1984      999904+  82  Linux swap
    /dev/hdb2   *        1985      158816    79043328   83  Linux
    (/dev/hdb2 mounted at /)
Output of lspci:
 00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4)
 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
 00:07.1 IDE interface: VIA Technologies, Inc.  
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
 00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 16) 00:07.4 SMBus: VIA 
Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
 00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio 
Controller (rev 50)
 00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd.  RTL-8139/8139C/8139C+ 
(rev 10)
 01:00.0 VGA compatible controller: ATI Technologies Inc Rage XL AGP 2X (rev 65)

Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

I selected the Finnish language, and I am going to use the Finnish
strings, since I don't know the corresponding English strings (I will
translate the translations back to English).

Booted OK.  In "Tee verkkoasetukset" (network configuration), there are
strange middle-dot characters between words.  There are missing
whitespace between certain words in the "Valitse peilikopio" (choose
mirror) screen.  The translation "Valitse peilikopio", BTW, sounds
strange; it's literally "choose a copy of the mirror".

After partitioning and creating file systems, the installer screen is
empty for quite a long time, which made me wonder if it had hanged (it
hadn't).

During "Asennetaan perusj�rjestelm��" (install base system), visual
feedback on progress is lacking.  The progress bar is updated with too
long intervals.

In "J�rjestelm�n uudelleenk�ynnistys" (system reboot), I am advised
about a custom boot floppy.  Since I was never offered creating one, it
sound strange and confusing.

After reboot, Starting MTA takes a looooong time.  There were some error
messages about keymaps, but they went by too quickly to be read.  I am
asked about my keyboard again (should reuse the pre-reboot choice), I get
the error message again, and I later discover I still have the US keyboard
layout although I chose "Finnish" (and it worked pre-reboot).

I am asked about my timezone.  Could reuse the pre-boot locale choices?
Helsinki is filed under "Intian valtameri", not "Europe" (and "Europe"
lists eg Adelaide).

After creating the user, I get the menu.  I try to manually select
setting up apt, but I get the following message:
  /usr/sbn/base-config:: line 138: ./menu/n: tiedostoa tai hakemistoa ei
  ole
(that's "no such file or directory").  I log in at another VC, run
apt-get update and then try selecting the next menu option, select
packages to install or some such.  The installer appears to freeze and
I lose my patience; I type shutdown -h now in the other VC, and during
shutdown, I see the installer was not frozen, but I no longer could
abort shutdown.  I stopped here and went to bed.

Overall, looks very good even though there are lots of minor problems.
-- 
Antti-Juhani Kaijanaho, Debian developer   http://www.iki.fi/gaia/

Attachment: signature.asc
Description: Digital signature

Reply via email to