Package: installation-reports Severity: normal INSTALL REPORT
Debian-installer-version: http://people.debian.org/cdimage/testing/netinst/i386/keep_20040103/sarge-i386-netinst.iso uname -a: Linux rothschild 2.4.22-1-386 #9 Sat Oct 4 14:30:39 EST 2003 Date: 2004-01-12 Method: CDROM installation Machine: Desktop Machine, VIA KT400 based motherboard Processor: Athlon XP 2200+ Memory: 512M Root Device: IDE, ST380021A (80G) Root Size/partition table: Disk /dev/hda: 80.0 GB, 80026361856 bytes 16 heads, 63 sectors/track, 155061 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System mount point /dev/hda1 * 1 69754 35155984+ 83 Linux / /dev/hda2 69755 71692 976752 82 Linux swap swap Output of lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge 00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80) 00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80) 00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80) 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller (rev 50) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [E] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: I installed the bootloader to /dev/ide/[....devfs crap....]/part1, but the installer did not initialize the MBR on the disk. So after an unsuccessful reboot attempt I examined the situation and ran the install-mbr manually. Values extracted from questions.dat: Name: lilo-installer/activate-part Template: lilo-installer/activate-part Value: true Name: lilo-installer/bootdev Template: lilo-installer/bootdev Value: /dev/ide/host0/bus0/target0/lun0/part1 Flags: seen -- System Information: Debian Release: testing/unstable Architecture: i386 Kernel: Linux rothschild 2.6.1-mm2 #2 Mon Jan 12 17:18:11 CET 2004 i686 Locale: LANG=C, LC_CTYPE=C -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
