Package: installation-reports Version: N/A Severity: wishlist INSTALL REPORT
Debian-installer-version: http://people.debian.org/~vorlon/d-i/xfs/, Jan-12-2004 uname -a: Linux fsgi651 2.4.22-xfs-386 #1 Fri Jan 2 10:40:30 CST 2004 i686 GNU/Linux Date: Jan 12, 2004 Method: Burned sarge-i386-xfs-netinst.iso, booted off CD and installed base system from CD. Machine: Dell Dimension 2400, n-series Processor: Intel(R) Pentium(R) 4 CPU 2.66GHz Memory: 512M Root Device: /dev/hda5, WDC WD800BB-75FRA0 Root Size/partition table: <Feel free to paste the full partition table, with notes on which partitions are mounted where.> major minor #blocks name rio rmerge rsect ruse wio wmerge wsect wuse running use aveq 78125000 ide/host0/bus0/target0/lun0/disc 32098 ide/host0/bus0/target0/lun0/part1 Dell partition 96390 ide/host0/bus0/target0/lun0/part2 /boot 498015 ide/host0/bus0/target0/lun0/part3 swap 1 ide/host0/bus0/target0/lun0/part4 9767488 ide/host0/bus0/target0/lun0/part5 / 67730008 ide/host0/bus0/target0/lun0/part6 /ptmp Output of lspci: 00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 01) 00:02.0 VGA compatible controller: Intel Corp. 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device (rev 01) 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01) 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01) 00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01) 00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 01) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 81) 00:1f.0 ISA bridge: Intel Corp. 82801DB LPC Interface Controller (rev 01) 00:1f.1 IDE interface: Intel Corp. 82801DB Ultra ATA Storage Controller (rev 01) 00:1f.3 SMBus: Intel Corp. 82801DB/DBM SMBus Controller (rev 01) 00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio Controller (rev 01) 01:09.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Can't reconfigure without reloading b44 Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [E] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Grub used root device as groot when it should have noticed that /boot was a separate partition and used that. I tried changing eth0, using the b44 driver, from dhcp to static and had trouble getting the network back up. I had to unload the b44 driver and reload it to get the network up again. This system has a video card that isn't supported in XFree86 4.2.1. I upgraded to sid and installed XFree86 4.3.0 from http://debian.fabbione.net/debian-ipv6. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
