Package: installation-reports Version: 20040121 Severity: normal INSTALL REPORT
Debian-installer-version: daily CD image 20040121 uname -a: Date: 2004-jan-22 23:00 CET Method: netinst CD image Machine: Siemens Primergy 400 Processor: PentiumIII Memory: 640Mb Root Device: Root Size/partition table: Output of lspci: 00:00.0 Host bridge: Intel Corp. 440GX - 82443GX Host bridge 00:01.0 PCI bridge: Intel Corp. 440GX - 82443GX AGP bridge 00:02.0 System peripheral: Siemens Nixdorf AG FSC Multiprocessor Interrupt Controller (rev 02) 00:03.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) 00:04.0 Class ff00: Siemens Nixdorf AG FSC Copernicus Management Controller (rev 01) 00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) 02:00.0 VGA compatible controller: Cirrus Logic GD 5446 (rev 45) 02:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 01) 02:09.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) 02:0a.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [ ] Config network: [ ] Detect CD: [E] Load installer modules: [E] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Booted from CD, selected the italian language and keyboard and then there was a problem about detecting CD. (It is a SCSI CD.) I selected to 'perform manual CD-ROM configuration?', then 'select from list', then I got a list of device name. I did try both 'cdrom' and 'none' without being lucky. I then went gack to the original message screen (perform manual CD-ROM configuration?) but every time I press 'no' it keep reasking the question. Selecting Yes, and then No at the next question got me to the main menu. I then selected 'load installer modules' from main menu, and d-i found a (correct) list of modules needed for this hardware. It said that the list could be loaded and then it showed me again the message about the probing of CDROM. summary: cannot mount cdrom, cannot load installer modules :-( Bye, Giuseppe -- System Information: Debian Release: testing/unstable Architecture: i386 Kernel: Linux casa 2.4.23-xfs #1 SMP Sun Jan 4 17:49:41 CET 2004 i686 Locale: LANG=C, LC_CTYPE=C -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
