Package: installation-reports We installed 3 d330uT based machines at Solutions Linux 2004 ; of the 3 machines, 2 had a dualhead Quadro 4 graphic card.
Debian-installer-version: Beta2 uname -a: handbuilt 2.6.2-rc1 kernel Date: 2003-02-02 Method: netinst Machine: HP d330uT unit with 17in TFT monitor Processor: Pentium4 2.6 GHz Memory: 500 MB Root Device: IDE, single disk on primary master Root Size/partition table: 1 GB swap on hda1, rest of the disk (~35 GB) on hda2 Output of lspci: -- For the basic d330uT : 00:00.0 Host bridge: Intel Corp. 82865G/PE/P Processor to I/O Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics Device (rev 02) 00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02) 00:1d.1 USB Controller: Intel Corp. 82801EB USB (rev 02) 00:1d.2 USB Controller: Intel Corp. 82801EB USB (rev 02) 00:1d.7 USB Controller: Intel Corp. 82801EB USB2 (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2) 00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02) 00:1f.2 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio Controller (rev 02) 05:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5782 Gigabit Ethernet (rev 03) -- For the d330uT + Quadro 4 graphic card 00:00.0 Host bridge: Intel Corp. 82865G/PE/P Processor to I/O Controller (rev 02) 00:01.0 PCI bridge: Intel Corp. 82865G/PE/P Processor to AGP Controller (rev 02) 00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02) 00:1d.1 USB Controller: Intel Corp. 82801EB USB (rev 02) 00:1d.2 USB Controller: Intel Corp. 82801EB USB (rev 02) 00:1d.7 USB Controller: Intel Corp. 82801EB USB2 (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2) 00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02) 00:1f.2 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation NV17GL [Quadro4 200/400 NVS] (rev a3) 05:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5782 Gigabit Ethernet (rev 03) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [E/O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: The machines come with an integreated Broadcom chipset which is supported by the tg3 driver in the 2.6 kernel. We had to borrow a 3c509 card to install the base system before building a 2.6 kernel. The mirror configuration entered a loop, we eventually got out of it at some point. JB. -- Julien BLACHE <[EMAIL PROTECTED]> | Debian, because code matters more Debian & GNU/Linux Developer | <http://www.debian.org> Public key available on <http://www.jblache.org> - KeyID: F5D6 5169 GPG Fingerprint : 935A 79F1 C8B3 3521 FD62 7CC7 CD61 4FD7 F5D6 5169 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
