Package: installation-reports Version: debian-installer beta-2 (daily package 20040225) Severity: normal
INSTALL REPORT Debian-installer-version: Feb 25, 2004 (beta-2) from http://gluck.debian.org/cdimage/testing/daily/i386/20040225/sarge-i386-netinst.iso uname -a: Linux falco 2.4.24-1-386 #1 Wed Feb 18 19:44:56 EST 2004 i686 GNU/Linux Date: Feb 26, 2004 Method: install from CD and network Machine: Notebook ACER TravelMate 220 Processor: Intel Celeron 1133MHz Memory: 256 MB Root Device: IDE, hda5 Root Size/partition table: Hard disk 20GB Setup: /dev/hda1 7GB NTFS WinXP /dev/hda2 1GB FAT32 /dev/hda5 5GB ext3 / /dev/hda6 512KB swap /dev/hda7 2GB ext3 /var /dev/hda8 4GB ext3 /home Output of lspci: 00:00.0 Host bridge: Intel Corp. 82830 830 Chipset Host Bridge (rev 04) 00:02.0 VGA compatible controller: Intel Corp. 82830 CGC [Chipset Graphics Controller] (rev 04) 00:02.1 Display controller: Intel Corp. 82830 CGC [Chipset Graphics Controller] 00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02) 00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42) 00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02) 00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio Controller (rev 02) 00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem Controller (rev 02) 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:09.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [0] Detect hard drives: [0] Partition hard drives: [ ] Create file systems: [O] Mount partitions: [O] Install base system: [E] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Install base system: This worked flawlessly, nonetheless I got a message about ide-scsi missing but actually it was there at the end... ??? Another oddity: the installer configured grub perfectly but the post-installation script reminded about configuring lilo. Post installation: After the reboot the installation was completed downloading all the packages I required from my preferred debian mirror. The Xfree86 server worked but wasn't properly configured by the post-installation script. Then I had to do a dpkg-reconfigure xserver-xfree86 which solved the problem Conclusion: Install was successful and easy -- Antonio-Blasco Bonito Phone: +39 050 315-2958 E-mail: [EMAIL PROTECTED] Istituto di Scienza e Tecnologie dell'Informazione "A. Faedo" CNR Area della Ricerca di Pisa Via G. Moruzzi 1 56124 Pisa Italy -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
