Debian-installer-version: Mars 1st 2004, http://gluck.debian.org/cdimage/testing/daily/i386/20040301/sarge-i386-businesscard.iso uname -a: Linux goblin 2.4.24-1-386 #1 Wed Feb 18 19:44:56 EST 2004 i686 GNU/Linux Date: Mars 1st 2004, 2100-2400 GMT+1 Method: CDRom sarge-i386-businesscard.iso, DHCP, no Proxy.
Machine: Homemade PC-Tower (ASUS A7V133 Motherboard) Processor: AMD Duron 800 Memory: 512 MB Root Device: Onboard-IDE Root Size/partition table:Disk /dev/hda: 20.5 GB, 20547841536 bytes 255 heads, 63 sectors/track, 2498 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/hda1 * 1 2 16033+ 83 Linux // Boot (/boot) /dev/hda2 3 10 64260 82 Linux swap //Swap /dev/hda3 11 2498 19984860 5 Extended //Extended /dev/hda5 11 2498 19984828+ 83 Linux // Root (/)
Output of lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 02) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] 00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22) 00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 10) 00:04.2 USB Controller: VIA Technologies, Inc. USB (rev 10) 00:04.3 USB Controller: VIA Technologies, Inc. USB (rev 10) 00:04.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30) 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:11.0 Unknown mass storage controller: Promise Technology, Inc. 20265 (rev 02) 01:00.0 VGA compatible controller: STMicroelectronics STG4000 [3D Prophet Kyro Series] (rev 0f)
Base System Installation Checklist:
Initial boot worked: [O] Configure network HW: [E] Config network: [O] Detect CD: [O] Load installer modules: [E] Detect hard drives: [O] Partition hard drives: [E] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Configure network HW: I Have no Diskdrive in computer so it reported it as "failed to install" but I dont know if its a bug or just as it should be. Load installer modules: Dont remember if it where here or in Install base system: . When on something like 10-20% it complained about: "Fel i DBootstrap", dont remember exactly what it said, but i just choose Load installer modules again and it worked w/o problems. (possible network-problem perhaps) Partition hard drives: When partitioning harddrives some spellingerrors, running Swedish language. "<Hj�lp>" is "<Hj >" and "<Type" is "<Ty >" also when changing type it choose wrong type when entering "linux ext", it choose "linux swap".
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
