On Feb 27, 2004, at 12:14 AM, Barry Hawkins wrote:
Package: installation-reportsIs there some reason that this and other powerpc installation reports are not being followed up on?
Debian-installer-version: http://gluck.debian.org/cdimage/testing/daily/
powerpc/20040226/sarge-powerpc-businesscard.iso
uname -a: N/A, install fails
Date: 02/26/2004, 23:30 EST
Method: Booted to CD-ROM by holding down C after chime, using
debian.mirrors.pair.com
Machine: 15" Aluminum PowerBook G4 1GHz
Processor: G4 1GHz
Memory: 768MB RAM
Root Device: IDE 60GB drive
Root Size/partition table: Root size is 4.4GB, I can't access the partition
table right now
Output of lspci: sarge-powerpc-businesscard.iso
Base System Installation Checklist:
Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [E] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Toward the end of the install, past 70%, the following message appears:
No installable kernel found No installable kernel was found in the defined APT sources.
The current default kernel package is 'kernel-image'.
You may try to continue though this strange error is probably fatal.
The debug console shows the following:
Setting up tasksel (1.44) ... chroot: cannot execute apt-get: No such file or directory
Thanks, -- Barry C. Hawkins All Things Computed site: www.allthingscomputed.com weblog: www.yepthatsme.com
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
