Debian-installer-version: 10.03.2004 http://gluck.debian.org/cdimage/testing/sarge_d-i/i386/beta2/sarge-i386-netinst.iso
uname -a: <The result of running uname -a on a shell prompt>
Date: 11.03.2004
Method: Burned image to CD-R and booted from it.
Machine: Intel 865PERL equiped computer
Processor: Pentium 4 HT 2,8 GHz
Memory: 512 MiB
Root Device: Wasn't that far
Root Size/partition table: Wasn't that far. So far I have 1 NTFS partition and free space at end of 120GB Maxtor SATA harddisk.
Output of lspci:
Base System Installation Checklist:
Initial boot worked: [E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
When I booted and pressed enter at first propt. It loaded kernel. Started installer. Asked about locales & keyboards. Then it started loading modules. After screen:
Detecting Hardware 80 % Module 'ide-detect' for 'Linux IDE detection'
Computer has not responding any actions, keyboard LEDs wasn't responding to pressing *lock's. C-A-D didn't work. Had to press reset.
I am equiped with i865PE chipset with SATA controller (1 Maxtor disk) and in PATA port there is one CDROM drive (where I booted). These PE chipsets are coming to quite common in here. So I think fixing this problem should be fixed in near future.
I created hardware report wiht PC Wizard 2004 for another case and here is url for it:
http://jumi.lut.fi/~vjaaskel/all-categories.txt
Thanks, Vesa J��skel�inen
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
