Package: installation-reports Debian-installer-version: Beta-3, 16march2004
uname -a: Linux debpes 2.4.25-1-386 #1 Tue Feb 24 08:11:13 EST 2004 i686 GNU/Linux Date: 16march2004, 12:54PM EST Method: Used 100MB CD, booted from standard IDE ATAPI CD-ROM Machine: Compaq Deskpro EN 733 Processor: Pentium III 733MHz Memory: 384MB SDRAM Root Device: 40MB IDE Hard Drive, Western Digital WD400BB Root Size/partition table: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/hda5 none swap sw 0 0 /dev/hda1 / ext3 defaults,errors=remount-ro 0 1 Output of lspci: 00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 01) 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 01) 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 01) 00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 01) 00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 01) 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS 02:08.0 Ethernet controller: Intel Corp. 82801BA/BAM/CA/CAM Ethernet Controller (rev 01) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Worked great! The new option to auto-partition is an EXCELLENT addition and a CRUCIAL step for new users. The auto-ejecting CD at the end of the install is a nice touch too. And finally a nice graphic at the initial boot. Bravo! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
