>>>sh dev dka0.0.0.4.0 DKA0 TOSHIBA CD-ROM XM-6202B 1110 dkd0.0.0.1009.0 DKD0 RZ1CB-BS 0818 dkd100.1.0.1009.0 DKD100 RZ1CB-BS 0818
dva0.0.0.0.1 DVA0 ewa0.0.0.3.0 EWA0 00-00-F8-75-F0-99
ewb0.0.0.11.0 EWB0 08-00-2B-C3-6A-80
pkc0.7.0.1008.0 PKC0 SCSI Bus ID 7 5.57
pkd0.7.0.1009.0 PKD0 SCSI Bus ID 7 5.57
pqa0.0.0.4.0 PQA0 PCI EIDE
pqb0.0.1.4.0 PQB0 PCI EIDE
>>>
I have a serial line connected to this So i should be able to capture any output that you would be interested.
-- ph: 603-884-5742
~ # dmesg Linux version 2.4.24-1-generic ([EMAIL PROTECTED]) (gcc version 3.2.3 20030221 (Debian prerelease)) #1 Wed Feb 18 19:45:11 EST 2004 Booting GENERIC on Miata using machine vector Miata from SRM Major Options: LEGACY_START Command line: ramdisk_size=16384 root=/dev/ram devfs=mount,dall console=ttyS0 DEBCONF_PRIORITY=low memcluster 0, usage 1, start 0, end 236 memcluster 1, usage 0, start 236, end 16383 memcluster 2, usage 1, start 16383, end 16384 freeing pages 236:384 freeing pages 733:16383 reserving pages 733:734 Initial ramdisk at: 0xfffffc0007c58000 (2805812 bytes) pci: cia revision 1 (pyxis) On node 0 totalpages: 16383 zone(0): 16383 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: ramdisk_size=16384 root=/dev/ram devfs=mount,dall console=ttyS0 DEBCONF_PRIORITY=low HWRPB cycle frequency bogus. Estimated 499767319 Hz Using epoch = 1952 Console: colour VGA+ 80x25 Calibrating delay loop... 988.76 BogoMIPS Memory: 122200k/131064k available (1617k kernel code, 6976k reserved, 454k data, 176k init) Dentry cache hash table entries: 16384 (order: 5, 262144 bytes) Inode cache hash table entries: 8192 (order: 4, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 8192 bytes) Buffer cache hash table entries: 1024 (order: 0, 8192 bytes) Page-cache hash table entries: 16384 (order: 4, 131072 bytes) POSIX conformance testing by UNIFIX pci: passed tb register update test pci: passed sg loopback i/o read test pci: passed pte write cache snoop test pci: failed valid tag invalid pte reload test (mcheck; workaround available) pci: passed pci machine check test pci: tbia workaround enabled pci: enabling save/restore of SRM state PCI: Bus 1, bridge: Digital Equipment Corporation DECchip 21152 IO window: 8000-8fff MEM window: 09000000-0a3fffff PREFETCH window: 0a400000-0a4fffff pci: pyxis 8K boundary dma bug - sg dma disabled Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x1 initialize_kbd: Keyboard reset failed, no ACK keyboard: Timeout - AT keyboard not present?(ed) keyboard: Timeout - AT keyboard not present?(f4) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 2.88M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 16384 bind 16384) Linux IP multicast router 0.06 plus PIM-SM RAMDISK: Compressed image found at block 0 Freeing initrd memory: 2740k freed VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 176k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. srm_env: version 0.0.5 loaded successfully usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb.c: registered new driver serial usbserial.c: USB Serial support registered for Generic usbserial.c: USB Serial Driver core v1.4 ~ #
