Package: installation-reports Debian-installer-version: 3/16/04 I think the build was from 3/15 though.. sarge-i386-netinst.iso
uname -a: NA Date: 3/12/04 1:00 pm EST Method: used sarge-i386-netinst.iso on a cd. Machine: Custom, Soyo P4865PE Plus Dragon2, 512 MB, Pentium 4 3.2 GHtz, GeForce FX5200 video card Sony DVD,DVD+-RW, 80GB Maxtor Processor: Pentium4 3.2 GHtz Memory: 512MB Root Device: IDE Root Size/partition table: ext3 / +-80Gig swap 512MB Output of lspci: 00:00.0 Host bridge: Intel Corp. 82865G/PE/P Processor to I/O Controller (rev 02) 00:01.0 PCI bridge: Intel Corp. 82865G/PE/P Processor to AGP Controller (rev 02) 00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02) 00:1d.1 USB Controller: Intel Corp. 82801EB USB (rev 02) 00:1d.2 USB Controller: Intel Corp. 82801EB USB (rev 02) 00:1d.3 USB Controller: Intel Corp. 82801EB USB (rev 02) 00:1d.7 USB Controller: Intel Corp. 82801EB USB2 (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2) 00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02) 00:1f.3 SMBus: Intel Corp. 82801EB SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) 02:02.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet 10/100 model NC100 (rev 11) 02:07.0 Ethernet controller: Davicom Semiconductor, Inc. Ethernet 100/10 MBit (rev 40) Base System Installation Checklist: Initial boot worked: [O ] Configure network HW: [E ] Config network: [E ] Detect CD: [O ] Load installer modules: [O ] Detect hard drives: [O ] Partition hard drives: [O ] Create file systems: [O ] Mount partitions: [O ] Install base system: [O ] Install boot loader: [O ] Reboot: [O ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: 1. I received the error 'modprobe -v dmfe' but, this time by clearing the error out I was able to get the network configuration and by doing an ifdown on the linksys card I was able to get to the mirrors.. 2. nvidia configuration, is this out of scope for this project? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
