Package: installation-reports INSTALL REPORT
Debian-installer-version: 2004/03/14, download ftp.debian.org uname -a: Linux linus 2.4.25-1-386 #1 Tue Feb 24 08:11:13 EST 2004 i686 GNU/Linux Date: 2004/03/19, 16:40 Method: CDROM netinst 100MB (beta 3 of Debian-installer) Machine: NoName PC Processor: AMD Duron 900 MHz Memory: 512 MB Root Device: /dev/hda12 Root Size/partition table: 3GB % fdisk -l /dev/hda Disk /dev/hda: 40.0 GB, 40037760000 bytes 255 heads, 63 sectors/track, 4867 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 128 1028128+ 6 FAT16 /dev/hda2 * 129 1900 14233590 f W95 Ext'd (LBA) /dev/hda5 129 192 514048+ 82 Linux swap /dev/hda6 193 256 514048+ 83 Linux /dev/hda7 257 517 2096451 83 Linux /dev/hda8 518 648 1052226 83 Linux /dev/hda9 649 909 2096451 b W95 FAT32 /dev/hda10 910 1170 2096451 b W95 FAT32 /dev/hda11 1171 1535 2931831 83 Linux /dev/hda12 1536 1900 2931831 83 Linux % mount /dev/hda12 on / type ext3 (rw,errors=remount-ro) proc on /proc type proc (rw) /dev/hda1 on /dosc type vfat (rw) /dev/hda9 on /dosd type vfat (rw) /dev/hda10 on /dose type vfat (rw) /dev/hda11 on /pam type ext2 (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) usbfs on /proc/bus/usb type usbfs (rw) Output of lspci: Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [E] Reboot: [E] Comments/Problems: Reboot used still active old MBR in hda1, not hda2 as seleted in GRUB configuration dialog: hda0,1. After enabling hda2 as active, Debian base config came up fine. Wish: Chain loading old MBR in hda1 would have been nice. German translation is almost perfect. Good job! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
