Package: installation-reports Severity: normal
Debian-installer-version: snapshot from 25.3.2004, downloaded from gluck uname -a: Linux tpalbert 2.4.25-1-386 #1 Tue Feb 24 08:11:13 EST 2004 i686 GNU/Linux Date: 27.3.2004/16:00 Method: Boot of CD (full netinstall cd), netinstall from http://ftp.at.debian.org Machine: IBM Thinkpad X31 2672CEG Processor: Intel Pentium M 1.4GHz Memory: 512M Root Device: IDE, /dev/hda6 Root Size/partition table: /dev/hda6 20G 1.6G 19G 8% / /dev/hda2 28M 6.1M 21M 23% /boot Output of lspci: 00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 03) 00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 03) 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01) 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01) 00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01) 00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 01) 00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 81) 00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 01) 00:1f.1 IDE interface: Intel Corp. 82801DBM Ultra ATA Storage Controller (rev 01) 00:1f.3 SMBus: Intel Corp. 82801DB/DBM SMBus Controller (rev 01) 00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio Controller (rev 01) 00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem Controller (rev 01) 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY 02:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa) 02:00.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa) 02:00.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 02) 02:02.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04) 02:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (MOB) Ethernet Controller (rev 81) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [E] Config network: [E] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: booting from usb2 dvd drive worked fine, as did the first configure steps When detecting network hw, the installer did try to load modules for every part of the hw present on the system (which is a bit misleading I think), and even though i told him not to do so, tried to load every ide driver module availible (via,promise,...), which of course failed every time with an error message. Network config via dhcp didn't work, for one reason or another (I now that the dns server works), but did fine when configureing manualy) when doing the general hw detection, it again tried to load every availible ide driver module, even though i diactivated them) One other thing, ehich is not all that importand for me though: When I told the install to install with kernel 2.6.4, it failed because it didn't find kernel-pcmcia-modules-2.6.4-686 (or was it kernel-pcmcia-modules-2.6.4-1-686, sorry I forgot) that is quite a minor issue for me because i compile my kernel myself, so the installed one is replace quite soon (maybe it is importand: i selected to install unstable, not sarge) -- System Information: Debian Release: unstable Architecture: sh: line 1: /dev/null: No such file or directory (i686) Kernel: Linux 2.4.25-1-386 Locale: LANG=C, LC_CTYPE=C -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
