Package: installation-reports INSTALL REPORT
Debian-installer-version: http://gluck.debian.org/cdimage/testing/daily/i386/20040406/sarge-i386-businesscard.iso booted, but didn't found my wlan card http://gluck.debian.org/cdimage/testing/daily/i386/20040406/sarge-i386-netinst.iso didn't booted on my notebook http://gluck.debian.org/cdimage/testing/daily/i386/20040405/sarge-i386-netinst.iso didn't booted on my notebook http://gluck.debian.org/cdimage/testing/sarge_d-i/i386/beta3/sarge-i386-netinst.iso finaly worked uname -a: <The result of running uname -a on a shell prompt> Date: Mi Apr 7 02:54:24 CEST 2004 Method: How did you install? What did you boot off? If network install, from where? Proxied? Bootet from the internal cd-drive, installed via wireless lan (Netgear MA401 pcmica card) from a local mirror without proxy Machine: Compaq Armada E500 Notebook Processor: Pentium III Coppermine, 900 MHz Memory: 256M Root Device: Hitachi 2.5 inch drive, connected to primary ide Root Size/partition table: 7GB root on hda1 512M swap on hda5 rest /home on hda6 Output of lspci: 00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 00:04.0 CardBus bridge: Texas Instruments PCI1225 (rev 01) 00:04.1 CardBus bridge: Texas Instruments PCI1225 (rev 01) 00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03) 00:08.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10) 00:09.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 09) 00:09.1 Serial controller: Lucent Microelectronics LT WinModem 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [E] - might be a problem with my drive Configure network HW: [O] Config network: [E] - a "secret" wireless lan Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: During the installation I had two problems: First I was unable to boot the netinst daily snapshot from 2004-04-06 or -05. That might be a problem of my cd-drive, but I wonder why I was able too boot busnisscard sized iso and beta 3. I installed via wireless lan, but needed to switch to shell, and set the essid manually, since my router hides it. After reboot network didn't work anymore, I needed to set wep-key and essid manually. Las question: I booted with the option "vga=791", since I like to use the whole display of my notebook. However: After the reboot this kernel-parameter got lost. Would it be possible to check, if the user specified a kernel parameter and add them to the bootloader? Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
