Package: installation-reports INSTALL REPORT
Debian-installer-version: http://gluck.debian.org/cdimage/testing/sarge_d-i/i386/beta3/sarge-i386-businesscard.iso uname -a: (I installed newer kernel after initial installation) Linux piglet 2.6.4-1-386 #1 Sat Mar 13 17:49:12 EST 2004 i686 GNU/Linux Date: 4/7/2004 Method: How did you install? What did you boot off? If network install, from where? Proxied? business card CD deb http://ftp.us.debian.org/debian/ unstable main (through proxy) Machine: HP Omnibook 500 Processor: Pentium III (Coppermine) Memory: 511MB LOWMEM available. Root Device: hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33) Root Size/partition table: Device Boot Start End Blocks Id System /dev/hda1 * 1 1021 8195008+ c W95 FAT32 (LBA) Partition 1 does not end on cylinder boundary. /dev/hda2 1022 3586 20603362+ 83 Linux (mounted as /) /dev/hda3 3587 3648 498015 f W95 Ext'd (LBA) /dev/hda5 3587 3648 497983+ 82 Linux swap Output of lspci: 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03) 0000:00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01) 0000:00:0b.0 Ethernet controller: 3Com Corporation 3c556 Hurricane CardBus (rev 10) 0000:00:0b.1 Communication controller: 3Com Corporation Mini PCI 56k Winmodem (rev 10) 0000:00:0d.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator 0000:00:11.0 IDE interface: CMD Technology Inc PCI0648 (rev 01) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [ O] Configure network HW: [ O] Config network: [ O] Detect CD: [ O] Load installer modules: [ O] Detect hard drives: [ O] Partition hard drives: [ O] Create file systems: [ O] Mount partitions: [ O] Install base system: [ O] Install boot loader: [ E] Reboot: [ O] Comments/Problems: Nice overall. The only problem was that I had previously installed Windows XP in /dev/hda1. The grub configuration asked whether to install in the master boot record, and warned that doing so might prevent other OS's from booting. So I said 'don't install in the MBR'. But afterwards, I couldn't boot Windows XP anyway. I think this is because it marked /dev/hda2 as the bootable partition. After I marked /dev/hda2 as non-bootable and /dev/hda1 as bootable, Windows XP booted fine. Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
