Package: installation-reports Debian-installer-version: at 2004-04-10 from http://gluck.debian.org/cdimage/testing/sarge_d-i/i386/beta3/sarge-i386-businesscard.iso uname -a: Linux debian 2.4.25-1-386 #1 Tue Feb 24 08:11:13 EST 2004 i586 unknown ...from the ramdisk system Date: 2004-04-10 Method: Burnt iso image to cdr, booted from cdr, network install from ftp://debian.tu-bs.de and ftp://ftp.tu-clausthal.de Proxied by my own router with squid v2.5.STABLE-CVS on an AMD-K6/300MHz Gentoo-system Machine: ATX-PC with Via-Apollo MVP3 chips Processor: AMD-K6-III/400MHz Memory: 256MB SDRAM Root Device: <IDE /hda2 (boot) /hda3 (/)> Root Size/partition table: Disk /dev/ide/host0/bus0/target0/lun0/disc: 4303 MB, 4303272960 bytes 255 heads, 63 sectors/track, 523 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End
Blocks Id System
/dev/ide/host0/bus0/target0/lun0/part1 1 109
875511 83 Linux # unused, rootpartition of slackware 7.2
/dev/ide/host0/bus0/target0/lun0/part2 110 111
16065 83 Linux # /boot
/dev/ide/host0/bus0/target0/lun0/part3 112 523
3309390 83 Linux # /
Output of lspci: none possible, ramdisk system has no such
command
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E]
Install boot loader: [E]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Install base system:
Install proceedes until loading kernel 2.6.3-1-386 I have
chosen, then the menue complained an error because of the
installation of the pcmcia-modules and stops.
The virtual console 3 told:
E: Couldn't find package kernel-pcmcia-modules-2.6.3-1-386
Install boot loader:
Any further step e.g installing the grub bootloader denied
working and stepped back to install the base system until the error
is repeated and this leads to an interactive infinite loop.
As I have an IBM compatible PC with no PCMCIA nor cardbus this is
an unescessary module to be loaded. I don't understand why the
install procedure insists on doing so and I wonder why at all
because there is no such hardware to be found at my system.
Greetings,
Sascha Wuestemann
--
GNU Linux | ... with liberty and justice for all ... who can afford
2.6.4 | it.
on a |
i586 |
|
|
pgp00000.pgp
Description: PGP signature
