Package: installation-reports Debian-installer-version: beta3/sarge-i386-netinst.iso (first release of 2004/3/15) uname -a: Linux debian 2.4.25 GNU/Linux i486 and i686 (hand-configured kernel after install) Date: 18/3/2004 Method: Two installations. One i686 booting from CD, network install from ftp.fr.debian.org via ppp/adsl, no proxy. One i486 laptop, booting from tomsrtbt, copied install-system and plip module via plip, then boot install-system on hda1 with lilo,
Machine: hand-build home PC / Toshiba T4800CT Processor: AMD DUron / 486DX Memory: 263Mo / 40Mo Root Device: IDE disk partition for both Root Size/partition table: Nothing special. Swap = memory. Output of lspci: 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06) 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 1a) 0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c) The laptop has no pci bus. Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: No problem, but since it's a beta release, you want to know when it works, too, aren't you? One (minor) remark: the bootkbd=fr option before loading d-i start on CD boot had no effect. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]