Package: installation-reports INSTALL REPORT
Debian-installer-version: 2004-05-08, from http://http.us.debian.org/debian/dists/testing/main/installer-mipsel/current/images/cobalt/netboot/ uname -a: Linux remailer 2.4.25-r5k-cobalt #1 Thu Apr 15 15:17:00 BST 2004 mips GNU/Linux Date: 2004-05-08, about 19:00GMT Method: netboot install on cobalt RAQ2/NASRAQ, boot from network (TFTP/NFS), network install from http://ftp.at.debian.org/, proxied over my local squid. Machine: Cobalt NasRAQ Processor: MIPS, Nevada V10.0 FPU V10.0 Memory: 64 MB Root Device: IDE (Seagate ST320423A) Root Size/partition table: Disk /dev/hda: 2490 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/hda1 * 0+ 1 2- 16033+ 83 Linux /boot /dev/hda2 2 2311 2310 18555075 83 Linux / /dev/hda3 2312 2489 178 1429785 83 Linux swap /dev/hda4 0 - 0 0 0 Empty Output of lspci and lspci -n: 0000:00:00.0 Memory controller: Marvell: Unknown device 4146 (rev 11) 0000:00:07.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) 0000:00:08.0 SCSI storage controller: LSI Logic / Symbios Logic 53c860 (rev 02) 0000:00:09.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 27) 0000:00:09.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT82 3x/A/C/VT8235 PIPC Bus Master IDE (rev 06) 0000:00:09.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 02) 0000:00:00.0 Class 0580: 11ab:4146 (rev 11) 0000:00:07.0 Class 0200: 1011:0019 (rev 41) 0000:00:08.0 Class 0100: 1000:0006 (rev 02) 0000:00:09.0 Class 0601: 1106:0586 (rev 27) 0000:00:09.1 Class 0101: 1106:0571 (rev 06) 0000:00:09.2 Class 0c03: 1106:3038 (rev 02) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [ ] Reboot: [O] Comments/Problems: given that this is a beta on a rather off-mainstream platform, it worked very well. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
