Hello, On Mon, 2004-05-03 at 11:43, Martin Michlmayr wrote: > * Gordon Heydon <[EMAIL PROTECTED]> [2004-05-03 09:28]: > > 1. Was not able to load up pcmcia network card. > > Was this possible last time? What card is it? Can you please show > the putput of the commands lspci and lspci -n. > I am not sure, I testing under vmware last time, this time I found a spare hd for my laptop that I could use, so I tested on that instead.
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) (rev 02) 00:02.0 CardBus bridge: Texas Instruments PCI1250 (rev 02) 00:02.1 CardBus bridge: Texas Instruments PCI1250 (rev 02) 00:03.0 VGA compatible controller: Neomagic Corporation NM2160 [MagicGraph 128XD] (rev 01) 00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01) 00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01) 00:00.0 Class 0600: 8086:7192 (rev 02) 00:02.0 Class 0607: 104c:ac16 (rev 02) 00:02.1 Class 0607: 104c:ac16 (rev 02) 00:03.0 Class 0300: 10c8:0004 (rev 01) 00:07.0 Class 0680: 8086:7110 (rev 01) 00:07.1 Class 0101: 8086:7111 (rev 01) 00:07.2 Class 0c03: 8086:7112 (rev 01) 00:07.3 Class 0680: 8086:7113 (rev 01) > > 2. again when creating lvm disk pvcreate was not executed. > > 3. when installing on the base system the devices for the lvm was not created > > in the chroot'ed environment, so the kernel was unable to install. > > Hmm, I'll investigate this tomorrow. Did you run pvcreate by hand, or > how did you get lvm to work if pvcreate was not run? > Yes to get past this, I had to run pvcreate by hand, and then I was able to proceed with the creation of the filesystems and loading of the core system. Thanks for this. If you need any more just yell. -- Gordon Heydon <[EMAIL PROTECTED]> Web Site - www.heydon.com.au Author of htmlarea for Drupal - for a demo see http://www.heydon.com.au/htmlareademo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
