* Carsten Faltin <[EMAIL PROTECTED]> [2004-05-18 21:42]: > I wanted to install another i440BX box with the installer beta 4 and > it installed again the k7 kernel.
Can you check a daily image from http://gluck.debian.org/cdimage/testing/sarge_d-i/ and see if they work? * Carsten Faltin <[EMAIL PROTECTED]> [2004-03-22 22:02]: > 00:0b.0 Unknown mass storage controller: CMD Technology Inc Silicon Image SiI 3112 > SATARaid Controller (rev 02) Your installation report mentioned that you're using a machine with SATA disks. Since the last beta of debian-installer was released, a large number of changes related to SATA have been made. In particular, we now ship a 2.4.26 kernel with (some) SATA support. We're currently preparing a new test release of debian-installer (release candidate 1), and we'd appreciate it if you could try our daily image and tell us whether this works. This will give us some time to make important changes if so requires before rc1 is released. You can find current images at http://gluck.debian.org/cdimage/testing/sarge_d-i/ We'd appreciate it if you could test this image and tell us if the issues you mentioned in your bug report have been dealt with, and in particular whether your SATA disks are recognized and work. You can either boot normally (by pressing enter or typing "linux") and will get a 2.4.26 kernel with SATA, or you can type "linux26" and get a 2.6 kernel; both should work, and we'd appreciate feedback about both of them. Thanks > ISSUE 2 - kbd-chooser > I used the german language during install but the sort order is in > english. Deutsch (gemran) is under G, should be under D. I think this is a known issue. > ISSUE 3 - bootloader > After the Install hangs at 86% i tried to install a bootloader, but > then always a base install started. This is because the base installation was not completed. -- Martin Michlmayr [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
