Package: installation-reports INSTALL REPORT
Debian-installer-version: Beta 4, May 27, 2004, http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/beta4/sarge-i386-netinst.iso uname -a: Linux granny 2.4.25-1-386 #2 Wed Apr 14 19:38:08 EST 2004 i686 GNU/Linux Date: May 27, 2004 Method: Wrote image to CD-R, booted from that, installed base system from CD, then rest from http://ftp.fi.debian.org. No HTTP proxy. Machine: PC, assembled from various parts Processor: AMD Duron, 800 MHz Memory: 512 MB Root Device: Samsung 160 GB IDE hard disk Root Size/partition table: Disk /dev/hda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 608 4883728+ 83 Linux /dev/hda2 609 730 979965 83 Linux /dev/hda3 731 19457 150424627+ 83 Linux /dev/hda1 on / type ext3 (rw,errors=remount-ro) proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) /dev/hda3 on /home type ext3 (rw) usbfs on /proc/bus/usb type usbfs (rw) /dev/hda2 is swap, even though the partition type is not marked as such. Output of lspci and lspci -n: [EMAIL PROTECTED]:~$ lspci pcilib: Cannot open /sys/bus/pci/devices 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06) 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 1a) 0000:00:07.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 1a) 0000:00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50) 0000:00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:00:0a.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet 10/100 model NC100 (rev 11) 0000:00:0c.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) 0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04) [EMAIL PROTECTED]:~$ lspci -n pcilib: Cannot open /sys/bus/pci/devices 0000:00:00.0 Class 0600: 1106:0305 (rev 03) 0000:00:01.0 Class 0604: 1106:8305 0000:00:07.0 Class 0601: 1106:0686 (rev 40) 0000:00:07.1 Class 0101: 1106:0571 (rev 06) 0000:00:07.2 Class 0c03: 1106:3038 (rev 1a) 0000:00:07.3 Class 0c03: 1106:3038 (rev 1a) 0000:00:07.4 Class 0600: 1106:3057 (rev 40) 0000:00:07.5 Class 0401: 1106:3058 (rev 50) 0000:00:08.0 Class 0200: 10ec:8139 (rev 10) 0000:00:09.0 Class 0200: 10ec:8139 (rev 10) 0000:00:0a.0 Class 0200: 1317:0985 (rev 11) 0000:00:0c.0 Class 0401: 1274:5880 (rev 02) 0000:01:00.0 Class 0300: 102b:0525 (rev 04) [EMAIL PROTECTED]:~$ Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: I found that the partition making was somewhat surprising (I did it manually). I don't know why, but it made me stop so that I could figure out what was going on. This is not a big problem, however. I was quite satisfied with this version of the installer (and the previous, though I don't think I filled in an install report for that). I had to do this install in a great hurry -- my firewall machine killed two of its hard disks and I needed a new firewall quickly. debian-installer totally failed to make my day worse. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
