Package: installation-reports
INSTALL REPORT
Debian-installer-version: 20040616 ftp.debian.org
uname -a: Linux debian 2.4.26-1-686 #1 Sat May 1 18:04:05 EST 2004 i686 GNU/Linux
Date: 20040625
Method: How did you install? debian-installer with CDROM, #1 & #2
What did you boot off? CD
If network install, from where? no
Proxied?
Machine: 2 machines: PPro[200MHz] 3 disks + CD, and PIII[800MHz] 2 disks + CD
Processor: PPro & PIII
Memory: 96M & 256M
Root Device: ide: hdd & hda
Root Size/partition table: 1G, /dev/md0
Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O] Configure network HW: [O] Config network: [E] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [E] Install boot loader: [E] Reboot: [O]
Comments/Problems:
The intent was to get a machine with all filesystems on RAID1, including root, swap and boot.
After installing from CD, the network is not configured, and the file
/etc/networking/interfaces must be changed by hand to list the interfaces there.
Although the network is not used in the installation itself, it should be
configured correctly anyway. ["dpkg-reconfigure netabse" dosn't do anything!]
I have seen the same kind of troubles described in Bug#251905. My workaround was somewhat different, and I did not use LVM. When the screen "Unable to install selected kernel" is on vt1, I have installed 'mdadm' in the target chroot system, did some cleanup [rm -fr /usr/bin/awk /lib/modules] to allow debootstrap to work again and installed the base-system in a dirty filesystem for a second time.
Eventually, I have skipped installing grub because grub dosn't know about /dev/md*
The raid configuration should also allow to use 'missing' devices, because the number of drives cannot be changed later and I do not want to destroy the filesystem that was working OK without raid, before configuring and testing with the new raid installation is OK. Only then I want to hotadd the old disk and have the benefits of RAID1.
There are only a few 'small' steps needed and the warning about debian
not supporting RAID on root and boot can be removed:
- If RAID is configured, 'mdadm' must be installed before the kernel
is configured.
- grub needs to learn about raid partitions
- debootstrap must allow redoing its work on a dirty filesystemi
[scripts/sarge:167 ln -fs mawk $TARGET/usr/bin/awk]The Raid partitioning dialogue allows you to define a new partition table on a raid device. I have doubts about this being supported by the kernel.
This may need attention of someone:
Jun 26 23:57:10 (none) syslog.warn klogd: md: parted_server(pid 17876) used obsolete MD ioctl, upgrade your software to use new ictls.
Jun 26 23:57:20 (none) syslog.warn klogd: md: find-partitions(pid 20656) used obsolete MD ioctl, upgrade your software to use new ictls.
Line 25 in file /etc/console-tools/config should be a comment. Othewise a kernel parameter "vga=ext" will be reset....
-- ---------------------------------------------------------------- -o) Matthijs Melchior Maarssen /\\ [EMAIL PROTECTED] Netherlands _\_v ---------------------------------------------------------------- ----
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
