Package: installation-reports Debian-installer-version: sarge-sparc-netinst.iso 30-Jun-2004 22:31 83.5M http://cdimage.debian.org/pub/cdimage-testing/daily/sparc/current/
uname -a: <The result of running uname -a on a shell prompt> Date: 01-Jul-2004 Method: CD-Rom; X6161A [S] 370-2816 [F] SunCD 12 Listed in: http://sunsolve.sun.com/handbook_pub/Systems/U60/components.html Machine: SUN Ultra 60, dual CPU 450 mhz IEEE Boot Prom 3.29.0 2000/12/20 SUN4U Processor: 2x450mhz Memory: 1269176k Root Device: SCSI Name of device: Fujitsu MAP3367NC Root Size/partition table: 36,7Gb <Feel free to paste the full partition table, with notes on which partitions are mounted where.> Output of lspci: Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [E] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: <Description of the install, in prose, and any thoughts, comments and ideas you had during the initial install.> [?] Detect and mount cdrom Error while running modprobe -v sr_mod The cdrom player is in the compatible components list for the Ultra60 (http://sunsolve.sun.com/handbook_pub/Systems/U60/components.html) The cdrom player is detected by Woody install cd. Thoughts: The harddisk Fujitsu MAP3367NC is also in the compatible components list for the Ultra60. Is it possible to have this disk predefined in the fdisk partitioner? Some older Ultra60 compatible disks are predefined and selectable in de fdisk partitioning dialog. It would be nice to have the Fujitsu MAP3367NC (and others from the components list) added. In the Woody fdisk dialog i was forced to answer all kinds of obscure questions about sectors/track, interleave facter etc.. Although i have the documentation on the drive..i was unsure about a number of answers. Has any work been done on the sound-card (Audio Module 501-4155) of this Ultra60? Apart from wanting to install the 2.6 kernel having sound would be a bonus. Thanks for the Sparc port :-) Regards, Marco Calf -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
