Package: installation-reports INSTALL REPORT
Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/daily/powerpc/20040711/sarge-powerpc-businesscard.iso uname -a: didn't get far enough to get this... Date: early AM EDT Saturday, July 12, 2004 Method: How did you install? What did you boot off? If network install, from where? Proxied? I used the BootX bootloader with the 2.6 kernel and initrd from the above CD image Machine: Beige G3 (OldWorld) PowerMac minitower with SIIG Ultra ATA 133/100 Pro IDE PCI card installed Processor: PowerPC G3 Memory: 384 MB Root Device: hdg9 Root Size/partition table: /dev/hdc # type name length base ( size ) system /dev/hdc1 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map /dev/hdc2 Apple_Driver43 Macintosh 54 @ 64 ( 27.0k) Driver 4.3 /dev/hdc3 Apple_Driver43 Macintosh 74 @ 118 ( 37.0k) Driver 4.3 /dev/hdc4 Apple_Driver_IOKit Macintosh 512 @ 192 (256.0k) Unknown /dev/hdc5 Apple_Patches Patch Partition 512 @ 704 (256.0k) Unknown /dev/hdc6 Apple_HFS untitled 2097152 @ 1216 ( 1.0G) HFS (MacOS 9.2) /dev/hdc7 Apple_UNIX_SVR2 root 19531251 @ 2098368 ( 9.3G) Linux native (not used) /dev/hdc8 Apple_UNIX_SVR2 swap 1953126 @ 21629619 (953.7M) Linux swap (swap) /dev/hdc9 Apple_UNIX_SVR2 root 19531251 @ 23582745 ( 9.3G) Linux native (root) /dev/hdc10 Apple_Free Extra 277059060 @ 43113996 (132.1G) Free space Block size=512, Number of Blocks=320173056 DeviceType=0x0, DeviceId=0x0 Drivers- 1: @ 64 for 23, type=0x1 2: @ 118 for 36, type=0xffff Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40) 0000:00:0e.0 SCSI storage controller: Artop Electronic Corp ATP865 (rev 06) 0000:00:10.0 Class ff00: Apple Computer Inc. Heathrow Mac I/O (rev 01) 0000:00:12.0 VGA compatible controller: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] (rev 9a) 0000:00:00.0 Class 0600: 1057:0002 (rev 40) 0000:00:0e.0 Class 0100: 1191:0009 (rev 06) 0000:00:10.0 Class ff00: 106b:0010 (rev 01) 0000:00:12.0 Class 0300: 1002:4754 (rev 9a) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [o] Configure network HW: [o] Config network: [o] Detect CD: [o] Load installer modules: [o] Detect hard drives: [o] Partition hard drives: [e] Note 1 Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: 1) I had so much fun trying to install the 2.6.6 kernel with the "testing" debs, I decided to try the "unstable" debs. I used DEBCONF_PRIORITY=medium, and made sure the HFS modules were loaded. When it got to the "Partition disks" phase, the progress bar got to around 22% then it went blank and returned to the main menu screen with "Partition disks" hilighted. Hitting return at this point blanks the screen for a few seconds then returns to the main menu with the same thing hilighted. I'll _never_ get a chance to partition my disk at this rate... Help? Rick -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
