Package: installation-reports Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/powerpc/20040716/sarge-powerpc-netinst.iso
uname -a: Linux ayu 2.4.25-powerpc #1 mer avr 14 15:38:38 CEST 2004 ppc GNU/Linux Date: 2004-07-16 Method: I used that cdrom image. Machine: iBook G4 12" 800MHz Processor: PowerPC G4 (3.3) Memory: 256 MB Root Device: IDE Root Size/partition table: Filesystem 1K-blocks Used Available Use% Mounted on /dev/hda5 3952568 416520 3335268 12% / tmpfs 127000 0 127000 0% /dev/shm Output of lspci: 0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP 0000:00:10.0 VGA compatible controller: ATI Technologies Inc RV250 5c63 [Radeon Mobility 9200 M9+] (rev 01) 0000:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI 0000:10:12.0 Network controller: Broadcom Corporation BCM94306 802.11g (rev 03) 0000:10:17.0 Class ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O 0000:10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0000:10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0000:10:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0000:10:1b.0 USB Controller: NEC Corporation USB (rev 43) 0000:10:1b.1 USB Controller: NEC Corporation USB (rev 43) 0000:10:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04) 0000:20:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI 0000:20:0d.0 Class ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100 0000:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81) 0000:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80) Base System Installation Checklist: Initial boot worked: [E] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Initial boot with argument "install" didn't work. I used "install-safe" and I could go on. Any other things were successful. I have some troubles with configuring X11, but that's not the installation problem. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
