Package: installation-reports INSTALL REPORT
Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/beta4/sarge-i386-netinst.iso uname -a: uname -a: Linux ledzep 2.4.25-1-386 #2 Wed Apr 14 19:38:08 EST 2004 i686 GNU/Linux Date: 19/07/2004 - 18h Method: How did you install? What did you boot off? If network install, from where? Proxied? Boot from installer CD, network install, mirror ftp://ftp.pucpr.br, proxy on Machine: Compaq Armada E500 Processor: Pentium III 600MHz Memory: 128MB Root Device: IDE, IBM Travelstar 5GB Root Size/partition table: proc /proc proc defaults 0 0 /dev/hda2 none swap sw 0 0 /dev/hda3 / reiserfs defaults 0 1 /dev/hdb /media/cdrom iso9660 ro,user,noauto 0 0 /dev/fd0 /media/floppy auto rw,user,noauto 0 0 /dev/hdb /cdrom iso9660 ro,user,noauto 0 0 Output of lspci and lspci -n: lspci: 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 0000:00:04.0 CardBus bridge: Texas Instruments PCI1225 (rev 01) 0000:00:04.1 CardBus bridge: Texas Instruments PCI1225 (rev 01) 0000:00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03) 0000:00:08.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10) 0000:00:09.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 09) 0000:00:09.1 Serial controller: Lucent Microelectronics LT WinModem 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) lspci -n: 0000:00:00.0 Class 0600: 8086:7190 (rev 03) 0000:00:01.0 Class 0604: 8086:7191 (rev 03) 0000:00:04.0 Class 0607: 104c:ac1c (rev 01) 0000:00:04.1 Class 0607: 104c:ac1c (rev 01) 0000:00:07.0 Class 0680: 8086:7110 (rev 02) 0000:00:07.1 Class 0101: 8086:7111 (rev 01) 0000:00:07.2 Class 0c03: 8086:7112 (rev 01) 0000:00:07.3 Class 0680: 8086:7113 (rev 03) 0000:00:08.0 Class 0401: 125d:1978 (rev 10) 0000:00:09.0 Class 0200: 8086:1229 (rev 09) 0000:00:09.1 Class 0700: 11c1:0445 0000:01:00.0 Class 0300: 1002:4c4d (rev 64) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [E] - Windows partition not mounted Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: - In general, a very good installation, found almost any hardware, including sound and video. - I don't know why two entries were included in fstab for the cdrom. - Network detection ok, including DHCP configuration. - Didn't test advanced power management, infrared devices, PCMCIA and modem. - Problems with Brazilian keyboard (abnt2 model): one key changed, one doesn't work - Synaptics touch pad required further install of apropriated package. Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
