-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Package: installation-reports Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/daily/i386/20040719/
uname -a: Linux homer 2.4.26-1-386 #2 Sat May 1 16:31:24 EST 2004 i686 GNU/Linux Date: 20th of July Method: Install via cdrom Machine: Self-built Processor: p4-1.6Ghz Memory: 512 MB Root Device: /dev/hda (ide) Root Size/partition table: Filesystem Size Used Avail Use% Mounted on /dev/hda3 8,1G 144M 7,5G 2% / tmpfs 252M 0 252M 0% /dev/shm /dev/hda1 9,2G 217M 8,5G 3% /usr Output of lspci: 0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 03) 0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 03) 0000:00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 01) 0000:00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 01) 0000:00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 01) 0000:00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller (rev 01) 0000:00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 81) 0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 01) 0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 01) 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97 Audio Controller (rev 01) 0000:00:1f.6 Modem: Intel Corp. 82801DB (ICH4) AC'97 Modem Controller (rev 01) 0000:01:00.0 VGA compatible controller: nVidia Corporation NV28 [GeForce4 Ti 4200 Go AGP 8x] (rev a1) 0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 01) 0000:02:01.0 CardBus bridge: Texas Instruments: Unknown device ac47 (rev 01) 0000:02:01.1 CardBus bridge: Texas Instruments: Unknown device ac4a (rev 01) 0000:02:01.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 802b 0000:02:01.3 System peripheral: Texas Instruments: Unknown device 8204 0000:02:03.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04) Base System Installation Checklist: Initial boot worked: � �[O] Configure network HW: � [O] Config network: � � � � [O] Detect CD: � � � � � � �[O] Load installer modules: [O] Detect hard drives: � � [O] Partition hard drives: �[O] Create file systems: � �[O] Mount partitions: � � � [O] Install base system: � �[O] Install boot loader: � �[O] Reboot: � � � � � � � � [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Noticed no problems. In particular I was happy to see that my PCMCIA wireless NIC was found during install and I was prompted for a WEP key which my access point requires. Everything worked nicely in general. - -- Frederik Dannemare | mailto:[EMAIL PROTECTED] GnuPG key: search for 'dannemare' on http://pgpkeys.mit.edu Key fingerprint: BB7B 078A 0DBF 7663 180A F84A 2D25 FAD5 9C4E B5A8 http://frederik.dannemare.net | http://www.linuxworlddomination.dk -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFA/XSLLSX61ZxOtagRAvfdAJ9ICfh5iOIOHLas3G1J6jxRlVF6XgCfSYgi DQGuBMCWA1ekmxcyDypzHkU= =NC9T -----END PGP SIGNATURE-----
