Package: installation-reports

Debian-installer-version: 2004/7/19 got from 
http://cdimage.debian.org/pub/cdimage-testing/daily/sparc/current/sarge-sparc-netinst.iso
uname -a: Linux (none) 2.4.26-sparc64 #1 Fri Jun 18 02:04:50 PDT 2004 sparc64 GNU/Linux
Date: Tue Jul 20 21:41:10 CEST 2004
Method: netinst CD

Machine: Sun Ultra 5
Processor: UltraSPARC IIi 306MHz
cpu             : TI UltraSparc IIi (Sabre)
fpu             : UltraSparc IIi integrated FPU
promlib         : Version 3 Revision 19
prom            : 3.19.4
type            : sun4u
ncpus probed    : 1
ncpus active    : 1
Cpu0Bogo        : 719.25
Cpu0ClkTck      : 0000000015752a00
MMU Type        : Spitfire
Memory: 256 MB
Root Device: /dev/hda
Root Size/partition table: 8.1GB
major minor  #blocks  name

   3     0    8420832 ide/host0/bus0/target0/lun0/disc
   3     1    7910280 ide/host0/bus0/target0/lun0/part1
   3     2     510552 ide/host0/bus0/target0/lun0/part2
   3     3    8420832 ide/host0/bus0/target0/lun0/part3
Output of lspci: 
0000:00:00.0 Host bridge: Sun Microsystems Computer Corp. Ultra IIi
0000:00:01.0 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge 
(rev 13)
0000:00:01.1 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge 
(rev 13)
0000:01:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
0000:01:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01)
0000:01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev 5c)
0000:01:03.0 IDE interface: Silicon Image, Inc. (formerly CMD Technology Inc) PCI0646 
(rev 03)

Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply via email to