Package: installation-reports Debian-installer-version: <http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/beta4/sarge-i386-netinst.iso on 07/21/2004> uname -a: <Linux eumee 2.4.25-1-386 #2 Wed Apr 14 19:38:08 EST 2004 i686 GNU/Linux> Date: <07/22/2004> Method: <Boot from cdrom, network install from intranet, no proxy >
Machine: <HP Proliant ML350> Processor: xeon Memory: 1G Root Device: <SCSI /dev/cciss/c0d0> Root Size/partition table: < 0.3 G on / 6G on /usr 6G on /var 0.3G on /tmp 14G on /home 8G on /someuser 0.5G swap> Output of lspci: 0000:00:00.0 Host bridge: ServerWorks CNB20-HE Host Bridge (rev 32) 0000:00:00.1 Host bridge: ServerWorks CNB20-HE Host Bridge 0000:00:00.2 Host bridge: ServerWorks CNB20-HE Host Bridge 0000:00:02.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01) 0000:00:02.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01) 0000:00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 0000:00:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02) 0000:00:05.0 System peripheral: Compaq Computer Corporation Advanced System Management Controller 0000:00:0f.0 ISA bridge: ServerWorks CSB5 South Bridge (rev 93) 0000:00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) 0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 05) 0000:00:0f.3 Host bridge: ServerWorks CSB5 LPC bridge 0000:00:11.0 Host bridge: ServerWorks CIOB-X2 (rev 05) 0000:00:11.2 Host bridge: ServerWorks CIOB-X2 (rev 05) 0000:02:02.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx (rev 01) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [?] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [E] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: <Great to see that the RAID array and the network controller are recognised, I tried 2 months ago and they did'nt. This solves a big problem for me. So all went well until GRUB. I just had some hesitation during the partitioning concerning the swap, I expected to find it among the file types, after having redone the partioning I understood how it works, perhaps I am dumb. GRUB refused to install, (... does not have any corresponding bios drive) I thought the name of the partition is'nt good and I tried others but none worked. I tried also to modify /boot/grub/device.map or delete it but nothing worked. I tried then lilo but not much happened (the last message was "setting up lilo...." Then I replay the install from beginning. After GRUB failure, I open a shell to investigate, I use nano to edit device.map, and then I try lilo another time, but it refuse to install, complaining that the lilo package is'nt on the CD (apparently, it has forgotten we are in a network install). Then I reinstall from beginning, use directly lilo, and it works!!!> Claire Boussard. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
