Package: installation-reports Debian-installer-version: 7/23/04 from http://people.debian.org/~joeyh/d-i/images/daily/netboot uname -a: 2.4.6-1-386 #2 Sat May 1 16:31:24 EST 2004 i586 unknown Date: 7/23/04 @ 5p Method: PXE boot using Intel Pro 100/M NIC
Machine: Compaq Deskpro 2000 5120 Processor: 120MHz Pentium Memory: 32MB Root Device: Dual IDE 17.2GB Drives (one master on each controller) Root Size/partition table: None created. Plan 2GB RAID1 /, 32GB RAID0 /home. Output of lspci: Unknown. Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [E] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: PXE boot Compaq Deskpro 2000 5120 system using Intel Pro 100/M NIC. Installer runs fine until reach step to partition drives. Currently have two 17.2GB IDE drives installed on the embedded controllers (had also tried with a single 1GB IDE) with the BIOS configured with the CHS values of the drives. Upon reaching "Starting up the partitioner," installation stalls at 38%/"Scanning disks..." Last recorded line in dmesg is: __alloc_pages: 0-order allocation failed (gfp=0x1d2/0) VM: killing process parted_server -- R. Seiji www.arslist.info -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
