Package: installation-reports INSTALL REPORT
Debian-installer-version: Built from svn 25 July 2004 1900:00 (or so) -0500 uname -a: Linux di 2.4.26-1-s390 #1 SMP Sun Apr 25 16:48:39 CEST 2004 s390 GNU/Linux Date: 25 July 2004 21:15 -0500 Method: IPL from virtual reader. Installed "unstable" from ftp.debian.org. IUCV network this time. Machine: IBM Multiprise 3000 H70 Processor: S/390 Memory: 64M virtual machine Root Device: 1000-cylinder (700 MB) minidisk at address 0150 Root Size/partition table: di:~# cat /etc/fstab; df # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> /dev/dasda1 / ext3 defaults,errors=remount-ro 0 1 /dev/dasdb1 /home ext3 defaults 0 2 /dev/dasdc1 none swap sw 0 0 /dev/floppy/0 /floppy auto rw,user,noauto 0 0 /dev/cdroms/cdrom0 /cdrom auto ro,user,noauto 0 0 proc /proc proc defaults 0 0 Filesystem 1K-blocks Used Available Use% Mounted on /dev/dasda1 708568 157964 514612 24% / tmpfs 30684 0 30684 0% /dev/shm /dev/dasdb1 348608 16440 314176 5% /home Output of lspci and lspci -n: n/a Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] (none other than network drivers) Detect hard drives: [O] Partition hard drives: [ ] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] (manual, peculiarity of architecture) Comments/Problems: The FSM module comments that it will taint the kernel, since it has no license. As it's derived from the GPL isdn4linux FSM, it too is presumably GPL, so we might want to fix this. I'll add it to my open kernel bug. Now CTC, IUCV, and qeth have all been tested and work. Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
