Package: installation-reports
Debian-installer-version: 20040724
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/current/sarge-i386-netinst.iso
uname -a: Linux debian 2.6.7-1-386 #1 Mon Jul 26 18:26:54 EDT 2004 i686 GNU/Linux
Date: 20040726
Method: Boot from net-install CD
Installed base system from same CD
Installed remaining packages from ftp://ftp.uk.debian.org
Machine: Clevo 2700C laptop (aka Rock Sigma Si) Processor: 1GHz Pentium III Memory: 512MB SD RAM Root Device: IDE Fujitsu Root Size/partition table: Disk /dev/hda: 20.0 GB, 20003880960 bytes 255 heads, 63 sectors/track, 2432 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/hda1 1 1094 8787523+ 83 Linux /dev/hda2 1095 1156 498015 82 Linux swap /dev/hda3 * 1157 2432 10249470 c W95 FAT32 (LBA)
Output of lspci:
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 31)
0000:00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
0000:00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
0000:00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 82)
0000:00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
0000:00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
0000:00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 02)
0000:00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
0000:00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
0000:00:0a.0 CardBus bridge: Texas Instruments PCI4410 PC card Cardbus Controller (rev 02)
0000:00:0a.1 FireWire (IEEE 1394): Texas Instruments PCI4410 FireWire Controller (rev 02)
0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter (rev 31)
Base System Installation Checklist:
Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Very happy with this install CD.
Tim
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
