Package: installation-reports
Debian-installer-version: 20040729, http://debian-amd64.alioth.debian.org/install-images/sid-amd64-monolithic.iso uname -a: 2.6.7-5-amd64-generic ([EMAIL PROTECTED]) (gcc version 3.3.4 (Debian 1:3.3.4-3)) #1 Thu Jul 15 02:11:18 CEST 2004 Date: 20040730 Method: converted ISO into USB image, booted using "expert vga=1", installation via http://debian-amd64.alioth.debian.org/pure64 unstable
Machine: Shuttle SN85G4V2, nforce3 150 Processor: AMD64 3200+ Newcastle Memory: 1GB Root Device: SATA Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10 Type: Direct-Access ANSI SCSI revision: 05 Root Size/partition table:
Device Boot Start End Blocks Id System /dev/sda1 * 1 487 3911796 83 Linux / /dev/sda2 488 1461 7823655 83 Linux preserve /dev/sda3 1462 1705 1959930 82 Linux swap swap /dev/sda4 1706 19457 142592940 5 Extended /dev/sda5 1706 9001 58605088+ 83 Linux preserve /dev/sda6 9002 19457 83987788+ 83 Linux preserve
Output of lspci:
0000:00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4) 0000:00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6) 0000:00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4) 0000:00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) 0000:00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) 0000:00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2) 0000:00:05.0 Ethernet controller: nVidia Corporation nForce3 Ethernet (rev a5) 0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2) 0000:00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5) 0000:00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2) 0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:01:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 0000:01:07.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev 01) 0000:02:00.0 VGA compatible controller: nVidia Corporation NV28GL [Quadro4 980 XGL] (rev a1) 0000:00:00.0 0600: 10de:00d1 (rev a4) 0000:00:01.0 0601: 10de:00d0 (rev a6) 0000:00:01.1 0c05: 10de:00d4 (rev a4) 0000:00:02.0 0c03: 10de:00d7 (rev a5) 0000:00:02.1 0c03: 10de:00d7 (rev a5) 0000:00:02.2 0c03: 10de:00d8 (rev a2) 0000:00:05.0 0200: 10de:00d6 (rev a5) 0000:00:06.0 0401: 10de:00da (rev a2) 0000:00:08.0 0101: 10de:00d5 (rev a5) 0000:00:0a.0 0604: 10de:00dd (rev a2) 0000:00:0b.0 0604: 10de:00d2 (rev a4) 0000:00:18.0 0600: 1022:1100 0000:00:18.1 0600: 1022:1101 0000:00:18.2 0600: 1022:1102 0000:00:18.3 0600: 1022:1103 0000:01:06.0 0c00: 1106:3044 (rev 80) 0000:01:07.0 0104: 1095:3512 (rev 01) 0000:02:00.0 0300: 10de:0288 (rev a1)
Base System Installation Checklist:
Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [E] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
I tried "Continue without boot loader", but this did not work. /var/log/syslog showed:
(process:6322): /target/bin/sed: relocation error: /target/bin/sed: symbol textdomain, version GLIBC_2.2.5 not defined in file libc.so.6 with link time reference WARNING **: Configuring 'nobootloader' failed with error code 127 WARNING **: Menu item 'nobootloader' failed.
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
