Hello,
I've been trying to install sarge on a PA-RISC computer HP 712 But it failed with the partition process.
Hence my question is (as you said [O] it passed the partition process) What exactly do you choose when partitioning the disk
Regards, Laurent
Kyle McMartin wrote:
Package: installation-reports
Debian-installer-version: http://people.debian.org/~jbailey/d-i/hppa/daily/boot.img
uname -a: Linux caradhras 2.4.26-32-smp #1 SMP Sun Jun 20 20:45:33 CEST 2004 parisc GNU/Linux
Date: July 28, 2004.
Method: netboot from local tftpd
Machine: HP B180L+
Processor: Merlin L2+ 180 (9000/778/B180L) (0) at 0xfffbe000 [62], versions 0x504, 0x0, 0x4
Memory: 416M
Root Device: SCSI /dev/sda
Root Size/partition table:
Device Boot Start End Blocks Id System /dev/sda1 1 31 31728 f0 Linux/PA-RISC boot /dev/sda2 32 275 249856 82 Linux swap /dev/sda3 * 276 1740 1500160 83 Linux /dev/sda4 1741 4091 2407424 83 Linux
sda3 is /, sda4 is /home
Output of lspci:
[EMAIL PROTECTED]:~$ lspci 0000:00:13.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 04) 0000:00:14.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
Base System Installation Checklist:
Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Worked fine, once again. Will try a cd install tomorrow.
System had mdetect installed, which tried to pull in read-edid, which obviously didn't work.
Cheers,
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
